Logo
 
 
 

Plastics industry

Universal testing machine Inspekt-SA 50kN, test room height 1750mm, with special extensometer for internal diameter measuring

Determination of the ring stiffness, the ring flexibility, the minimum compressive strength and the compression strength

Apex pressure testing machines

  • Branch: plastics industry

Determination of the ring stiffness on pipes

When testing the ring stiffness, differently sized pipe sections are tested depending on the underlying standard and the application the pipes are designed for.

Torsion testing device Inspekt T200H

Torsion testing device

Torsion testing device Inspekt 200H

Fields of application:

Torsional load on specimens made of different materials at static tests, e. g. :

  • plastic materials, composite materials
  • srews, drive shaft
  • torsion tests on wires according to DIN ISO 7800 and ASTM A938 as well as alternating torsion tests on wires according to DIN EN 2002-13
Special testing machine for the testing of glass fibre-reinforced plastic pipes

Nominal ring stiffness testing of glass fibre-reinforced plastic pipes

Special testing machine Inspekt S-XL 600kN, test room height 5000mm

  • Branch: plastics industry

The 6 metre high special testing machine S-XL 600kN has been developed especially for the testing of glass fibre-reinforced plastic pipes. These pipes are used, for example, as drinking water lines, waste water lines, irrigation or drainage systems...

inspekt 20 kN, 3 chambers

Testing insulation materials

Universal testing machine inspekt S 20kN with three test areas

  • Branch: plastics industry

Life without thermal insulation materials is inconceivable nowadays. In addition to typical material properties, key mechanical parameters determined of insulation materials also include tensile strength, expansion and compressive resistance and deformation behaviour...

1D length measure device "heavy" on mobile frame

1D LENGTH MEASURE DEVICE "TOUGH"

very robust linear measure gadget made of steel for profiles with large cross section, on mobile frame

  • measuring length:  3200 mm
  • for cross sections up to 300 x 300 mm
  • accuracy:  ± (0,05 mm + 0,02 mm x L), L=measuring length in m
  • very easy to use
  • high-quality, robust Magnescale® measurement systems
  • optional PC-/Printer Interface RS232/USB
1D length measurement device, mounted on the floor

1D LENGTH MEASUREMENT DEVICE "TOUGH"

very robust measuring device made of steel, fixed on the floor

  • measuring length:  4000 mm (others on request)
  • for cross sections up to 230 x 1500 mm
  • quick change system for measuring jaws
  • accuracy:  ± (0,05 mm + 0,02 mm x L), L=measuring length in m
  • very easy to use
  • high-quality, robust Magnescale® measurement systems
  • optional PC-/Printer Interface RS232/USB
inspekt SH 500kN

Vertex pressure testing of GRP pipes

Universal testing machine Inspekt SH 500kN with adjustable test space

  • Branch: plastics industry

Pipe systems from centrifugally cast glass fibre-reinforced polyester resin are used primarily in the water and waste water sectors. The pipe diameter can vary here between 150mm and 4000mm... 

 

inspekt 30/50kN vario

Testing flooring elements

Universal testing machine inspekt S Vario 30/50kN with mobile loading axle

  • Branch: wood and plastics industry

Flooring elements and their support systems are subjected to extreme mechanical loading in the form of compressive and bending forces... 

inspekt S 5kN

Testing foams

Universal testing machine Inspekt S 5kN with central loading

  • Branch: plastics industry

Soft elastic foams are primarily used for damping and insulation. Almost all plastics are suitable for foaming...

Special universal testing machine inspekt S 50kN

Nominal ring stiffness testing of plastic pipes

Universal testing machine inspekt S 50kN with a working area width of 750mm

  • Branch: plastics industry

The nominal ring stiffness characterises the strength behaviour of plastic pipes in the construction, electrical and water/waste water industries and is subject to European standards...

Universal testing machine Inspekt 250kN with temperature chamber and video exten-someter

Determination of mechanical properties on CFRP samples

Universal testing machine Inspekt 250kN with temperature chamber and video extensometer

  • Branch: Automotive industry, aviation and aerospace industry, plastics industry

Carbon fibre reinforced plastics (CFRP), commonly referred to as carbon, are manufactured by embedding carbon fibres as reinforcement into a plastic matrix. This structure ensures high strength and rigidity accompanied by low weight; the material is therefore used, for example, in aeronautics, vehicle construction or for sports equipment...

Universal testing machine inspekt 100kN/50kN

Tensile, compression and bending tests on GRP pipe systems

Universal testing machine inspekt 100kN with a lateral test room 50kN

  • Branch: plastics industry

GRP pipes are often part of a critical network in civil engineering, for energy suppliers or in other industrial plants. Often, not only they do transport relatively harmless substances and environmentally friendly liquids, but also chemicals, contaminated cooling or heating water, crude oil and similar. To prevent leaks – and thus contamination of the soil and ground water – plastic pipes must meet high material requirements...  

Universal testing machine inspekt table 5kN

Compression and bending testing on styrofoam samples with automatic feeding system

Universal testing machine inspekt table 5kN

  • Branch: plastics industry

Styrofoam is especially light and requires an extremely precise testing procedure that can manage large quantities: as part of continuous production, for instance... 

Universal testing machine inspekt 100kN/50kN (lateral test room)

Tensile testing of metals and plastics at various temperatures

Universal testing machine 100kN with lateral test room 50kN and temperature chamber

  • Branch: metal and plastics industry 

The universal testing machine inspekt 100kN with lateral test room 50kN was constructed for the tensile testing of metals and plastics at high and low temperatures...

 
 

 
Partner im BVMW      TÜV Siegel