Universal testing system for horizontal and vertical loads

Static or cyclic loads on tables, cabinets, containers, shelves, (chairs, revolving chairs, armchairs, stools, ...)

• horizontal and vertical test of tables
  
  the test frame can be conceived variably
  
  the installation of up to 4 test cylinders is possible
  
  
• test loads up to 1500/2500 N in dependence on the cylinder
  
  
• the operation is possible with the plc-controlling or with central control unit
  
  

Details

Complex control unit for furniture test stands

• control system supports defined cyclic loading and moving of furniture
  
  
• central control container for a wide range of test stands and actuators
  
  
• operation via PC and Windows® user surface
  
  
• integrated user panel and emergency-off switch
  
  
• 5 independent control channels
  
  
• all channels operate synchronously on an identical time basis
  
  
• both force and position control are possible
  
  
• the emergency-off switch circuit can be used for blocking as well

Details

Displacement testing sytem for vertical and horizontal load impacts, plc-controlled

• testing with horizontal and vertical forces
• plc-control with freely programmable cycle number and cycle time
• load frame - clearance 2500x2500x2000mm
• equipped with 2 pneumatic cylinders 50x300, testing force up to 700N
• equipped with 1 pneumatic cylinder 80x500, testing force up to 2500N
• upgradable until 4 cylinders (max)
• various loading rams
  

Details

Universal test field for tables and chairs

universal test field for alternating bending load tests on chairs according to EN 1335-3, EN 581-2, BIFMA X5.1, and for vertical and horizontal table tests, according to EN 527-3 and EN 581-3, 4 cylinders, plc-controlled

Details

Static, cyclic and dynamic loads on tables, cabinets, containers, shelves, (chairs, revolving chairs, armchairs, stools, ...)

• testing with horizontal forces
  
  
• basis of linmot module: linear guidance with tooth-belt drive, servomotor driven
  
  
• internal contact-free absolute position measurement system
  
  
• load cell at connecting rod in the force flow
  
  
• max. travel 1500 mm
  
  
• compressive / tensile forces up to 1000 N
  
  
• travel speed up to 1.6 m/sec (100 m/min)
  
  
• positioning system: 150 to 1500 mm height range
  
  
• operated by test stand control
  

Details

Test stand for the determination of fatigue durability of beds, mattresses and spring cores

Modular compact test stand for tests of fatigue durability of mattresses, spring cores and beds in accordance to EN 1957.

Details

Test device for pendulum stroke tests at seating furniture and desks

Test device for pendulum stroke tests, acc. to EN 581, EN 716, EN 1130, EN 1153, prEN 518, EN 1728, EN 12221, EN 12227, EN 12727 and ENV 1178

• bed plate 40 x 120 mm and a frame of aluminium profile with a height of 2300 mm
• pendulum axle, height adjustably, with a scale to read out the height of the pendulum axle over zero
• pendulum head, mounted swivelling, with a scale for the measurement of deflection in 1°-steps
• clamping connection 40 mm shaft diameter in the pendulum head, this makes possibly the easy changing of the various impact hammers
• 1 impact hammer 6,4 kg x 1000 mm, 1 impact hammer 5,0 kg x 1000 mm, 1 impact device 2,0 kg x 300 mm
• the deflection of the test object will be captured and displayed digitally (non-contacting) after the pendulum stroke impact
• the pairs of the findings (of time and amplitude) can be read out by the software and performed as a diagram on the PC
• additionally captured are findings of oscillation and damping

Details