Milling machines, Turning lathes, grinding machines, drilling equipment, cutting machines
- Magnescale characterizes a compact Design, which makes an installation under close space conditions possible without limiting the motion travel of the machine. Depending upon requirements can be selected from a various product range suitably to your application.
|
|
| |
|
|
 |
Digital scale GB-A
- Magnet technology
- Excellent resistivity with workshop conditions
- resistant to oil, dirt, vibrations and percussions (IP54).
- Compact Design
- Accuracy: ±5µm
- Resolution: 0,5µm
- Measuring length: 50mm to 2200mm
- Same thermal expansion coefficient as machine tools ((11±1) x 10 -6 /°C)
|
|
|
Digital scale SR 801
Yardstick with long measuring length for medium-sized up to big machine tools
- Magnet technology
- Excellent resistivity with workshop conditions (IP54)
- Resistant to oil, dirt, vibrations and percussions
- Accuracy: ± (2,5+2,5L/1000) µm (L = measuring length in mm)
- Resolution: 0,5µm
- Measuring length up to 3000mm
|
|
|
Digital scale SD 608RA
Compact magnet digital scale for applications of controls
- slim - compact construction
- Resolution; 0,5 µm and 1 µm
- Selectable A/B phase and UP/DOWN signals and synchronized zero point signal
- Same thermal expansion coefficient as machine tools ((11±1) x 10 -6 /°C)
- Most resistant with workshop conditions
- High speed of response: 60 m/min
- Enclosure equivalent to IP5
|
|
|
Digital scale SL 110/130
Contactless measurement for a large measuring range
- magnet technology
- Exzellente resistivity with workshop conditions (PL20B equivalent to IP67)
- Resistant to oil, dirt, vibrations and percussions
- Resolution: 10 µm
- Max. speed of response: 300 m/min (dependent on read head, adjustment)
- Available in lengths up to 30 m (SL130)
- High cost-efficiency. Simple installation into all machine types for wood and metalworking.
|
|
|
Digital scale SJ 700
Digital scale for milling machines
- magnet technology
- Exzellente resistivity with workshop conditions
- Resistant to oil, dirt, vibrations and percussions (IP54)
- Same thermal expansion coefficient as machine tools ((11±1) x 10 -6 /°C)
- Measuring length: 150 mm up to 1600 mm
- Accuracy: ±10µm
- Resolution: 5µm
- Economical scale for digital displays
|
|
|
Digital scale SR 33/34
- high-magnetizable material
- 40 µm signal period
- MR technology
- sinusoidal signal
- automatic adjustment
- DC signal
|
|
|
|
|
|
New Digital DisplayLH70/71
The position displays LH70/71 including all standard functions that will be needed for machine tools and therefore they are all-purpose. The displays are available with 1, 2 or 3 axis and have a resolution range between 0.5 μm and 10 μm. Additional the LH71 display is freely programmable and can indicate angles with a resolution up to 1 sec.
- All-purpose for different machine tools
- Alternatively accounting of axle from Z1 and Z2 or separated displaying of Z1 and Z2
- Tool storage
- Point of reference recognition and point of reference storage
- Diameter display and value bisection method function
- Angle indicator function
- Hole circle function
- TTL-line driver input (RS422: min. phase dif. 100 ns)
- Pprogramming (only LH 71)
|
|
|
Digital counter LH 51/52
Compact display with numerous functions for milling machines (LH51) and turning lathes (LH52)
- Selectable display resolution
- Selectable ABS/Inc. - display
- Linear error correction
- Built-in functions: RESET, Preset, Recall, data storage, point data memory, center computation and zero point recognition
- Milling machine functions (LH51): Contact sensor and pitch diameter function
- Centre lathe functions (LH52): Stop, addition and tool storage
- Inch/metrically
|
|
|
Digital counter LG 10
Display with basic functions
- selectable display resolution
- Standard characteristics
- Inch/metrically
- Resetting/call
- Linear error compensation
- Error alarm
- self diagnosis
- Resetting on zero
|
|
|
Digital counter LH 61
Programmable multi-function display
- Programming (manual over interface): up to 480 steps
- Selectable resolution
- Selectable ABS/INC - Display
- Linear error compensation
- Functions: Resetting, pre-setting, call, data storage, point data memory, contact sensor, pitch diameter function, center computation
- RS-232C interface
- Inch/metrically
|
|
|
