Special Testing Machines:
If so required by our customers, Hegewald & Peschke GmbH develops and manufactures special testing machines for special uses. These exclusively developed testing machines and devices are often based on major design and control features of the standard series inspekt.
This enables us to produce special orders of our customers in short time and at reasonable cost.
This enables us to produce special orders of our customers in short time and at reasonable cost.
Universal testing machine Inspekt lying 250kN
Universal testing machine Inspekt lying 250kN
- Industry: automobile industry
- Test task: tension- and compression tests at drive components of cars
- Machine: testing machine Inspekt 250 kN lying with testing stroke 2600mm (without tools), testing space width 610mm
- Accessories: T-slot plate for fixation of drive components of cars
- Software: Labmaster with tension test, compression test, block-program
Universal Testing Machine
Inspekt K 600kN
Inspekt K 600kN
600kN force- reference standard measuring machine with reference receiver
- Industry: weights and measures offices, calibration services
- Test task: calibration of force analyzers, wheel load weigher and similar measuring sensors
- Machine: testing machine Inspekt K 600 kN; workspace width 750mm, max. height in the course area 1400mm, in the pressure chamber 600mm; test sample load over reversal pendant, thereby always the same load direction for the reference measuring cell.
- Accessories: standard connection M64x4, adapter M50x3, extensions for tensile test room, pressure plates , extensions pressure plates, wear protection for lower testing room
- Software: adapted software version for calibration, automatic starting of the load stages, alternative units
inspekt 5kN S
inspekt 5kN S for dynamic testing
- this special testing machine of series inspekt with centered single spindle - load device is suitable for applications of material and dynamic testing in the incoming goods inspection area and stands for a very good cost/performance ratio.
- the image shows a maschine configuration for testing of soft and elastic foam materials according to DIN 53579 (hardness tester at finished parts, indentation hardness test at shaped parts), ASTM D 3574-B1 (indentation hardness) and EN ISO 3386-1 (determination of compression stress - deformation characteristic).
- the upper pressure plate has a diameter of 203mm and an edge radius R=1mm. the lower maschine table will be used as back pressure panel (rest panel) and offers in a range of 300x300mm a standardised grid with holes 6mm with a distance from each other of 20mm.
PUMA P1-600kN
Precision shaping machine P.U.M.A P1-600kN
- Precision shaping machine P.U.MA P1-600kN inspekt-series
- testing machine class 0.5
- solution of force measurement 120000 digit
- testing room width / assembly passage 450mm
- traverse stroke 50mm
- max. installation height 530mm
- speed 0,0005-200mm/min
- control of force, way and external displacement gauges tilting of traverse at X-and Y-axis during maximum load max. 10µm/m
- the Total rigidity is 600kN/mm
Testing press 50kN
single spindle universal testing machine 50kN
- This electromechanical single spindle- Testing press 50kN serves for the limited purpose material testing of metals, plastics, lightweight materials and construction units.
- The basis machine can be extended by Additional devices to handle miscellaneous test tasks. The samples can consist of all conceivable well-known and future materials or building groups.
- Areas of application are the science, research and development, test laboratories and the manufacturing-accompanying production control.
Inspekt 600kN for structural testing
Special universal testing machine 600kN for structural testing, Series inspekt
- The universal testing machine Inspekt 600kN is an electromechanical traction-pressure testing machine in 4 columns building method and a free of clearance roller threaded spindle in the upper central inspection room. The drive is controled by a AC servo engine wich is appropriated for maximally 600 kN and a test stroke of 800 mm.
- The inspection room was designed for a maximum sample lengths up to 2200mm between the tools and a sample width up to 600mm. The lower traverse table is height adjustable by an engine and in test position is automatically locked. The locking mechanism is supervised and is merged into the safety circuit run of the machine. The track for the bending support up to 1200mm are integrated in the traverse table .
- The setting up and installation of the universal testing machine took place on a foundation in a pit built for it. The operational area of the universal testing machine is the testing of glass-fiber reinforced heavy current insulators in the electrical industry.
inspekt 400 kN (3 testing spaces)
Special Testing Machine, 3 testing spaces: 400kN/ 150kN/ 10kN, Hub max. 5400mm
| mechanical design: | 2 free fixed linked up ball screws with spindle protection and 4 guide columns , drive over AC engine, Fmax = 400 kN in the middle work space 3 work spaces: - lateral work space<150kN 350mm deep - middle work space<400kN 900 mm wide - lateral work space<10kN 350mm deep Framework rigidity approx. 250kN/mm Colour in RAL7035, light-grey |
| testing speed: | Test speed of 0.01 - 200 mm/min with full load return speed 500 mm/min |
| dimensions and weighting : | Machine: B1100mm x T700mm x H6500mm, 8500 kg 3-Raum switchgear cabinet/engine servo: 900mm x 600mm x 700 mm |
| connections | 3x400V 50Hz protection 32A, 8 kVA, 5 40°C, 20-80% humidity |
inspekt 600 kN
P.U.MA.
P.U.MA.
Precision forming machine for materials research and development
| test task: | Simulation of micro forming processes, accurate implementation of distances and forces, max. tilt of load arm in x and y direction at 600 kN only 10 µm per m, thus allowing exact plane parallel forming process suitable for smallest forming distances |
| Maschine: | inspekt 600 kN P.U.MA. with roll thread spindles, 4 separate drives for each spindle, each spindle equipped with high-accuracy glass ruler distance measurement system, drives separately controlled allowing maximum precision in position control |
| Software: | Freely parametrizable Hegewald & Peschke GmbH universal material testing software, free test definition with result editor and option to include additional measurement channels |
inspekt 500 kN
Crushing test machine for manufacturers of glass fiber reinforced plastic pipes for the wastewater industry
| Prüfaufgabe: | apex (vertex) pressure tests of glass fiber reinforced wastewater pipes with diameters up to 3,000 mm, tensile test of pipe segments |
| Maschine: | electromechanical one-spindle testing machine inspekt 500 kN with 4 guide columns, motorized height adjustment and hydraulic fixation of load arm |
| Software: | Hegewald & Peschke GmbH universal material testing software with free test parametrisation for cyclic force and distance measurement |
inspekt 600 kN L
Lying strength testing machine for electrical industry, cable and rope manufacturers
|
|||||||
inspekt 20 kN (3 testing spaces)
Universal testing machine for manufacturers of insulating and foam materials
|
|||||||||
inspekt 20 kN (widened, complete protective housing)
Universal testing machine for furniture and automobile industry
|
|||||||
inspekt 30/50 kN vario
Universal testing machine for dynamic testing in floor plate industry
|
|||||||