Accessories Furniture Testing

Weights

Weights

Weight disks

  • aluminium weight disks acc. to EN with 350 mm diameter, 48 mm height and 10 kg weight for furniture stability tests  
  • steel weight disks, 5 / 10 kg, with ball grips and 32 mm bore, as additional weights used among others as seat weights
Pendulum stroke accessories

Pendulum stroke accessories

For pendulum stroke tests

  • pendulum stroke hammer 2kg, 5kg or 6,5kg for pendulum stroke tests
Pneumatic test axes

Pneumatic test axes

Pneumatic test axes

  • Pneumatic cylinder (Festo), round cylinder with tie rods
  • Load-controlled, or load and position-controlled actuators (pneumatic test axes) with a 5 kN load cell and 20 mm clamping adapter for easy connection and exchange of pressure pieces
  • Test loads of 1500 N / 2500 N / 4500 N (depending on the piston diameter)
  • Piston stroke 500 mm by default, up to 1000 mm are possible
  • Piston can be chosen arbitrarily
  • Absolute position measurement
  • Controller for pneumatic actuator via CAN-BUS
  • Pneumatic controller unit
  • Movement adapter for different actuators, swivelling or rotating and swivelling
Loading pads

Loading pads

Loading pads

Loading pads are all equipped with an adapter for the 20 mm clamp system and a Cardan joint to decouple the load cell from bending moments   

Standard types:

  • loading pad round, 100 mm diameter
  • loading pad round, 200 mm diameter 
  • seat dummies acc. to DIN/EN and NEN, GFK or polyamide full material ram rectangular, 250x200 mm (EN), GFK or polyamide full material  
  • loading pad rectangular, 300x250 mm (EN), GFK or polyamide full material 
  • arm rest loading pad with adjustable load point
  • loading pad for foot rest (steel)
Drop weights

Drop weights

Drop weights

  • drop weights for impact and high-pressure tests, adapted to impact test stand  
  • seat impactor drop weight with spring mechanism, 25 kg        
  • drop weight 8" acc. to BIFMA, 9.1 kg      
  • drop weight 16" acc. o BIFMA, 36 to 136 kg (ready to fill individually) 
  • drop weight 400 mm acc. to DIN 4551, 75 kg           
  • impact test device for horizontal glass acc. to EN 14072
  • drop weight leather bag (optionally with steelball filling) acc. to EN 581-2
  • drop weight bag without filling (ready to fill individually) acc. to BIFMA X5.1, X5.11 and X6.1
  • drop weight leather bag acc. to NF D61-062
  • drop weight bag of linen without filling (ready to fill individually) acc. to DIN EN 1860-1, ISO 7892
  • drop weight for drop testing of beds acc. to EN 716-2, XP S 54-081 (1999) und EN 12227-2, 10kg 
  • all drop weights have a connection 28 to10 mm
Fixing elements

Fixing elements

Fixing elements

  • continuous adjustable fixture height, adjustable between 100mm and 300mm
  • u-shaped fixture for the X-base center pillar
  • easy clamping of X-base (diameter from 35mm up to 115mm)
Test body in acc. to ISO13759

Test body

Test body in acc. to ISO13759

  • Application: test the function mechanisms for seating and reclining sofas according to DIN EN 13759: testing of strength and durability
  • Construction: the test body is designed in four parts and agile as shown in the standard. The weight distribution to the individual segments is realized by fixed steel weights , the total weight is 100kg. On the weight of the upper body is a ring bolt mounted, so the transport can be carried out by a lift. The foot is stabilized to the lower leg segment down with a node angle.
Load template

Load template

Load template for seating furniture

  • template according to ISO 7173 and EN 1728  
  • evaluation of load points „A“ and „B“  
  • marking of load point „C“  
  • overall weight (including integrated additional weight) = 20kg
Accessories for child furniture testing

Accessories for child furniture testing

Accessories for child furniture testing

  • according to DIN EN 716-2
 
 

 
Partner im BVMW      TÜV Siegel