Magnescale® - Digital Gauge

The company Hegewald & Peschke MPT Ltd. is a partner for sales and service of digital measuring technology by SONY Precision Technology Europe Ltd. since 1990. Especially for the consulting of companies and research institutes for applications of digital measurement technology in the special engineering and in the production of measurement technology for the production process, we are providing a wide range of stroke measurement systems and digital display units.

Sony Measuring Systems became Magnescale! Each change saves new chances - to 01 April 2010 Mori Seiki CO took over., Ltd. the measuring technique section by Sony Manufacturing of system Corp. and this leads Ltd. under the again created Magnescale CO.. further. The products are invariably further-produced as well as developed further and to be subject still to the strict internal quality requirements. 

For further information about Magnescale products please use the Magnescale Product Information Tool.

No responsibility can be taken for the correctness of this information.

 

Gauge DK830S

Gauge DK830S

30 mm stroke high-precision gauges in slim design

The new DK830 series provide a high accuracy of 1,3µm (p-p) over the full measuring stroke of 30mm and a resolution of 0,1µm with a max. response speed of 80m/min. The protective design grade of this gauge is up to IP67.Therefore this new DK830S series fits perfect for quality control in assembly and production with high throughput.

  • Output: A/B/REF TTL 5V (EIA-422)
  • Measuring range: 30 mm
  • Resolution: 0.1 μm (0.5 μm, 1µm)
  • Accuracy: ± 1.3 μm (V-type ± 1.7 μm)
  • Built-in reference point: 1 mm from spindle start
  • Max. response speed: 80 m/min (250 m/min)
  • Air driving: pneumatic push (V-type)
  • Protection class: IP67 (with bellows), IP53
  • Diameter of stem: 8 mm (option 20 mm)
  • Guaranteed number of strokes: 60 million (R-, LR-type), 30 million (VR-type)
  • Compatible with MG40-series (highspeed-data-communication)
  • Easy installation Flange type also available (option)
Gauge DK10

Gauge DK10

High accuracy, rugged gauges. Suitable for installation on machine

  • Output: A/B/Z phase voltage-differential line driver (EIA-422) TTL 5V
  • Measuring range: 10 mm
  • Resolution: 0.5 μm
  • Accuracy: ± 2 μm
  • Built-in reference point: 1 mm from spindle start
  • Max. response speed: 250 m/min
  • Air driving: optional (air lifter DZ174-010)
  • Protection class: IP64 (P-type), IP50
  • Diameter of stem: 20 mm
  • Extreme robust design for harsh environments
  • Compatible with MG40-series (highspeed-data-communication)
Gauge DK25

Gauge DK25

High accuracy, rugged gauges. Suitable for installation on machine

  • Output: A/B/Z phase voltage-differential line driver (EIA-422) TTL 5V
  • Measuring range: 25 mm
  • Resolution: 0.5 μm
  • Accuracy: ± 2 μm
  • Built-in reference point: 1 mm from spindle start
  • Max. response speed: 250 m/min
  • Air driving: optional (air lifter DZ174-025)
  • Protection class: IP64 (P-type), IP50
  • Diameter of stem: 20 mm
  • Extreme robust design for harsh environments
  • Compatible with MG40-series (highspeed-data-communication)
Gauge DK50/100

Gauge DK50/DK100

High accuracy, rugged gauges. Suitable for installation on machine

  • Output: A/B/Z phase voltage-differential line driver (EIA-422) TTL 5V
  • Measuring range: 50 mm / 100 mm
  • Resolution: 0.5 μm
  • Accuracy: ± 2 μm / ± 4 μm
  • Built-in reference point: 1 mm from spindle start
  • Max. response speed: 250 m/min
  • Air driving: optional (air lifter DZ174-025)
  • Protection class: IP64 (P-types), IP50
  • Diameter of stem: 20 mm
  • Robust design for harsh environments
  • Compatible with MG40-series (highspeed-data-communication)
Gauge DK155/DK205

Gauge DK155/DK205

High accuracy, rugged gauges. Suitable for installation on machine

  • Output: A/B/Z phase voltage-differential line driver (EIA-422) TTL 5V
  • Measuring range: 155 mm / 205 mm
  • Resolution: 0.5 μm
  • Accuracy: ± 5 μm / ± 6 μm
  • Built-in reference point: 5 mm from spindle start
  • Max. response speed: 250 m/min
  • Air driving: optional (air lifter DZ174-025)
  • Protection class: IP64 (P-types), IP50
  • Diameter of stem: 32 mm
  • Robust design for harsh environments
  • Compatible with MG40-series (highspeed-data-communication)
Messtaster DT12

Gauge DT12

Compact and slim gauges with 5 µm resolution

  • Measuring range: 12 mm
  • Resolution: 5 μm
  • Accuracy: ± 10 μm
  • Air driving: V-types
  • Protection class: IP64 (P-types with bellows)
  • Diameter of stem: 8 mm
  • Guaranteed number of strokes: min. 5 million
  • Excellent resistance to workshop conditions
  • Resistant to oil, water, dust, vibration and shock
Gauge DT32

Gauge DT32

Compact and slim gauges with 5 µm resolution

  • Measuring range: 32 mm
  • Resolution: 5 μm
  • Accuracy: ± 10 μm
  • Air driving: V-types
  • Protection class: IP64 (P-types with bellows)
  • Diameter of stem: 8 mm
  • Guaranteed number of strokes: min. 5 million
  • Excellent resistance to workshop conditions
  • Resistant to oil, water, dust, vibration and shock
Messtaster DT512

Gauge DT512

Compact and slim gauges with 1 µm resolution

  • Measuring range: 12 mm
  • Resolution: 1 μm
  • Accuracy: ± 6 μm
  • Air driving: optional (air lifter DZ176)
  • Protection class: IP64 (P-types with bellows)
  • Diameter of stem: 8 mm
  • Guaranteed number of strokes: min. 5 million
  • Excellent resistance to workshop conditions
  • Resistant to oil, water, dust, vibration and shock
MT12 / MT13 / MT14

MT12 / MT13 / MT14

Interpolators for gauges DT12 / DT32 / DT512

  • MT12/13: For connection to Magnescale-counter
  • MT14: Unterminated cable, TTL A/B-quadrature output by line driver [EIA-422 compliance]
  • Power supply +5 V DC
U12 / U30 / U60

U12 / U30 / U60

High-accuracy digital indicator with RS232C interface

  • Measuring range: 12 / 30 / 60 mm
  • Resolution: 1 μm
  • Accuracy: ± 2 µm (U12/30)/ ± 3 µm (U60)
  • Diameter of stem: 8 mm
  • Connectable to a personal computer through RS-232C interface
  • Peak hold for measuring max./ min./ peak-to-peak values
  • Inch/ metric display
  • Integrated damper mechanism to protect measured objects (U30B/ U60B)
MG10 / MG20 / MG30

MG10 / MG20 / MG30

Flexible digital gauge system for multi-point measuring

  • Compatible with most Magnescale Gauges
  • Up to 64 connectable gauges
  • Compatible with RS-232C, BCD
  • DIN rail mounting (35mm)
  • Operating voltage : 12-24VDC
  • Peak hold function: maximum, minimum, and peak-to-peak values
  • Comparator with GO / NO GO output
  • Reference point detection
  • Input resolutions : 0.1μm, 0.5μm, 1μm, 5μm, and 10μm
MG 40

New! MG40 series

Network measurement system for high-speed communication, multi-axis measurements, and data management.

MG40 series, new measurement system integrates the primary functions of a counter into the gauge itself to a high degree. The MG40 series does not have to count analog outputs or AB phase outputs of the gauge and acquires positional information directly via full digital communication.

LT10A

Digital-Display LT10A

Digital-Display LT10A for gauges DT12 / DT32

compact, low weighted and easy to install digital display

  • compact Design: DIN standard size of (72 mm x 72 mm B x H)
  • Resolution: 5 µm / 10 μm selectable
  • BCD or RS-232C I/O models are available
  • suitable for installation assembly
  • Direct connection of the display to a PLC or a computer possible
  • Momentarily -, maximum -, minimum and pointed pit CPU values as well as property/bad evaluation as built-in functions
  • ADD/SUB function (only with 2 the axle model)
  • Large selection for numerous applications
LT11A

Digital-Display LT11A

Digital-Display LT11A for gauges DT512

compact, low weighted and easy to install digital display

  • compact Design: DIN standard size of (72 mm x 72 mm B x H)
  • Resolution: 1 µm / 5 µm / 10 μm selectable
  • BCD or RS-232C I/O models are available
  • suitable for installation assembly
  • Direct connection of the display to a PLC or a computer possible
  • Momentarily -, maximum -, minimum and pointed pit CPU values as well as property/bad evaluation as built-in functions
  • ADD/SUB function (only with 2 the axle model)
  • Large selection for numerous applications
    LT20A

    Digital-Display LT20A

    Digital-Display LT20A for gauges DG-series

    compact, low weighted and easy to install digital display

    • compact Design: DIN standard size of (72 mm x 72 mm B x H)
    • Resolution: 0.5 µm / 1 µm / 5 µm / 10 μm selectable
    • BCD or RS-232C I/O models are available
    • suitable for installation assembly
    • Direct connection of the display to a PLC or a computer possible
    • Momentarily -, maximum -, minimum and pointed pit CPU values as well as property/bad evaluation as built-in functions
    • ADD/SUB function (only with 2 the axle model)
    • Large selection for numerous applications
      LT30

      Digital-Display LT30

      Digital-Display LT30 for gauges DK-series

      compact, low weighted and easy to install digital display

      • compact Design: DIN standard size of (72 mm x 72 mm B x H)
      • Zero point detection
      • Max. resolution: 0.1µm (selectable)
      • Maximum response speed: 20 MHz (A/B phase difference)
      • BCD or RS-232C I/O models are available
      • suitable for installation assembly
      • Direct connection of the display to a PLC or a computer possible
      • Momentarily -, maximum -, minimum and pointed pit CPU values as well as property/bad evaluation as built-in functions
      • ADD/SUB function (only with 2 the axle model)
      • Large selection for numerous applications
        LY71

        Digital-Display LY71

        Digital-Display LY71

        For measurements and control in diverse field uses. The required output board can be extended.

        • 1 or 2 axes connectable
        • Various outputs are enabled by mounting extension boards-BCD Output (Option)-Comparator Function: Relay / Open-collector (Option)
        • Peak Hold Function Convenient for Statistical Measurement
        • Convenient External Input Functions for Automatic Measurement
        • Display Resolution Switching
        • Data Storage.
        • Reset/Preset/Restart
        • Detecting Reference Point of Measurement Unit
        • Scaling
        • Flicker Control
          LY71

          Digital-Display LY72

          Digital-Display LY72 with RS232C interface

          For measurements and control in diverse field uses.

          • 1 to 3 axes connectable
          • RS-232C standard function
          • Peak Hold Function Convenient for Statistical Measurement
          • Convenient External Input Functions for Automatic Measurement
          • Display Resolution Switching
          • Data Storage
          • Reset/Preset/Restart
          • Detecting Reference Point of Measurement Unit
          • Scaling
          • Flicker Control
             
             

             
            Partner im BVMW      TÜV Siegel