• To get measurements with high reliability, precision and efficiency in each production area, Sony offers a broad spectrum at measures for many applications.

High-precision gauges for multi-place measuring devices and dynamic measurements

• Magnet technology
• Excellent resistance on workshop conditions
• Resistance to oil, dust and moisture
• Precision: ±0,5µm
• Resolution: 0,1µm
• Reference mark: 1
• Measurement range : 2mm / 12mm
• Compact dimensions (ideal for applications in machines)
• 25mm x 25mm x 110mm

Compact and slim gauge with 1µm resolution

• magnet technology
• Exzellente resistivity on workshop conditions (DT512P: IP64)
• Resistant to oil and dust
• Accuracy: ±3µm
• Resolution: 1µm
• Measuring range: 12 mm
• Compact dimensions ideally for applications in machines 12 x 34 x 116 mm
  

• Magnet technology
• perfect resistivity on workshop conditions
• Accuracy: ±5µm
• Resolution: 5µm
• Measuring range: 12mm
• Compact size ideally for applications in machines 12 x 34 x 116mm

Compact and slim gauge

• magnet technology
• Excellent resistivity on workshop conditions (DT32P7PV:IP64)
• Resistant to oil and dust
• Accuracy: ± 5µm
• Resolution: 5 µm
• Measuring range: 32 mm
• Compact size ideally for applications in machines 12 x 35 x 218mm (D x W x L)
• Also as pneumatically extendable type available (DT32NV/PV)
• Guaranteed life span: 5 million strokes
• Main applications: Automatic assortment of parts

high-precision, compact and slim gauges suitably for installation in machines 

• magnetic principle
• Excellent resistivity on workshop conditions
• Resistant to dust and vibrations.
• Accuracy: ±1µm
• Resolution: 0,5µm
• Measuring range: 5.2 mm and 10 mm
• Compactly and slim: 8 mm of outside diameters 74.5 mm of overall length (DG805BL)
• Low measuring force
• Spindle can be moved up and down by air lifting (DG805BL/810BL)
• Dust proof bellows
• Simple installation. Flange-well-behaved gauges are also available

high-precision, tough gauge suitably for installation in machines

• magnetic principle
• Excellent resistivity on workshop conditions
• Resistant to oil, water, dust, vibrations and percussions
• Accuracy: ±1µm (DG50BP/50BN) ±2µm (DG100BP/100BN) ±2,5µm (DG155BP), ±3µm (DG205BP)
• Resolution: 0,5µm
• Measuring range: 50 mm, 100 mm, 155 mm, 205 mm
• High measuring force (DG50BP/100BP)
• Low measuring force (DG50BN/100BN)
• Magnetic tracer (DG155BP/205BP)
• Simple assembly
• Various accessories available

For automatic control/measurement in production lines

• A/B quadrature output signal with differential line driver
• Highly reliable Magnescale principle
• High accuracy
• Kinds of voltage supply + 5V DC and + 12 V to + 24V DC
• Compact Design (outside diameter 8 mm: DG805/ 810)
• A wide measuring range taking off the product range (5.2 mm up to 205 mm)

Gauges suitably for installation in machines

• magnetic principle
• Excellent resistivity on workshop conditions (IP65)
• Resistant to oil and dust
• Integrated zero point
• A/B phase and zero point output signal by open Collector
• Measuring range: 10 mm, 30 mm and 60 mm
• Simple assembly
  

Slim, compact gauges

• magnet technology
• Excellent resistivity on workshop conditions (DL310B: IP64)
• Resistant to dust and vibrations
• Compact dimensions ideally for applications in machines
• A/B phases exit with open Collector
• Measuring range: 10mm and 30mm

high-precision digital gauge

• magnetic principle
• High accuracy: ±0,5 µm
• High resolution: 0,1µm
• Measuring range: 12 mm and 30 mm
• Integrated zero point
• Safety class system equivalent to IP64 (with bellows)
  

Compact, lightweighted and easy to install display.

• Compact design: DIN standard dimensions (72 mm x 72 mm B x H)
• Resolution: 5 µm
• Suitable for installation assembly
• Direct connection of the display at a PLC or a Computer is possible
• Instantaneous -, maximum-, minimum- and top-top-values and also good/bad-analysis as standard functions
• ADD/SUB function (only 2 axis-type)
• Huge range of applications
• Developed for the new gauges DK-Series

Multi-function display with different exchangeable input/output extension boards

• compact Design, suitably for installation assembly
• Selectable indicator resolution
• 5 different exchangeable I/O boards. Up to three boards can be installed at the same time
• comparator (Relays exit)
• RS-232C
• Comparator (open Collector exit)
• A/B phase exit
• BCD (open Collector exit)
• Resetting/pre-setting and call function
• Display of momentary -, maximum -, minimum and pointed pit CPU values
• ADD/SUBFUNCTION
• Zero point recognition
• DATA latch # Data memory
• Linear error correction
• Different control and data analyses by PLCs and computers
• Inch/metrically

Multi-function display with RS-232C interface

• compact Design, suitably for installation assembly
• Selectable indicator resolution
• RESET/Preset/Recallfunktion
• Support function for peak values for max. ones -, min. -, and pointed pit CPU value measurements
• ADD/SUB- function
• RS-232C interface
• Zero point recognition
• Data memory
• Linear error compensation
• Different control and data analyses by PLCs and computers possible
• Inch/mm change-over

This multi-place measure connects up to 10 Sony gauges. The tracer board (optional) contains a property/bad evaluation

• Compact Design
• Simple installation assembly
• Connects up to 10 Sony gauges
• LCD-Display
• display of momentary -, maximum -, minimum and sharpening values
• Property/bad evaluation # ADD/SUBFUNCTION
• Selectable counting direction
• LZ60-P (tracer board): 2 gauges per board (optional)
• LZ60-B/C (optional)
• LZ60-B (BCD)
• Union of up to 4 LT100 displays for up to 40 connectable linear gauges
• Resetting/pre-setting and call function

compact, low weighted and easy to install digital display

• compact Design: DIN standard size of (72 mm x 72 mm B x H)
• Resolution: 5 µm # suitable for installation assembly
• Direct connection of the display to a PLC or a computer possible
• Momentarily -, maximum -, minimum and pointed pit CPU values as well as property/bad evaluation as built-in functions
• ADD/SUB function (only with 2 the axle model)
• Large selection for numerous applications
  

compact, low weighted and easy to install digital display

• compact Design: DIN standard size of (72 mm x 72 mm B x H)
• Resolution: 1 µm
• suitable for installation assembly
• Direct connection of the display to a PLC or a computer possible
• Momentarily -, maximum -, minimum and pointed pit CPU values as well as property/bad evaluation as built-in functions
• ADD/SUB function (only with 2 the axle model)
• Large selection for numerous applications
  

compact, low weighted and easy to install digital display

• Compact Design: DIN standard size of (72 mm x 72 mm B x H).
• suitable for installation assembly
• Selectable indicator resolution: 0,5/1/5/10 µm
• Available with BCD or RS232C input/output
• RESET / Presetfunction
• Support function for peak values for maximum -, minimum and pointed pit CPU value measurements
• ADD/SUBFUNCTION (only with the 2 axis model)
• Data memory: resolution, counting direction, comparator points of reference, presetvalues, mode of operation, BCD indication (B type), communication parameter (C type) Inch/mm conversion
• Applications: Automatic assortment and measurement in production lines

scale system

• Compact tape scale for installation under close space conditions
• contactlessly scanning
• Magnetic scanning with excellent resistivity against dust, oil, vibrations and percussions
• Effective length from 50 mm to 100.000 mm
• recognizes linear shifts and produces with connection at PL101 read head and MJ500/600 Interpolator (both optional) a A/B quadrature signal Three types with different specifications of point of reference applications are available
  

• Magnet technology
• Resolution: 0,5 µm, 1 µm, 2 µm, 5 µm and 10 µm
• Extremely small building
• Simple assembly

Simple installation, highly exactly, compact laser scale

• Compact scale and read head Design for variety of applications
• Compactly for simple installation, high accuracy. Been suitable for the employment with instruments, which require high accuracy, e.g. electron microscopes and control devices in the semiconductor manufacture
• Planned for measurements independently of temperature, air pressure and dirty air
• Superior repetition accuracy offers owing to contactless measurement