• Magnescale characterizes a compact Design, which makes an installation under close space conditions possible without limiting the motion travel of the machine. Depending upon requirements can be selected from a various product range suitably to your application.

• Magnet technology
• Excellent resistivity with workshop conditions
• resistant to oil, dirt, vibrations and percussions (IP54).
• Compact Design
• Accuracy: ±5µm
• Resolution: 0,5µm
• Measuring length: 50mm to 2200mm
• Same thermal expansion coefficient as machine tools ((11±1) x 10 -6 /°C)

Yardstick with long measuring length for medium-sized up to big machine tools

• Magnet technology
• Excellent resistivity with workshop conditions (IP54)
• Resistant to oil, dirt, vibrations and percussions
• Accuracy: ± (2,5+2,5L/1000) µm (L = measuring length in mm)
• Resolution: 0,5µm
• Measuring length up to 3000mm

Compact magnet digital scale for applications of controls

• slim - compact construction
• Resolution; 0,5 µm and 1 µm
• Selectable A/B phase and UP/DOWN signals and synchronized zero point signal
• Same thermal expansion coefficient as machine tools ((11±1) x 10 -6 /°C)
• Most resistant with workshop conditions
• High speed of response: 60 m/min
• Enclosure equivalent to IP5

Contactless measurement for a large measuring range

• magnet technology
• Exzellente resistivity with workshop conditions (PL20B equivalent to IP67)
• Resistant to oil, dirt, vibrations and percussions
• Resolution: 10 µm
• Max. speed of response: 300 m/min (dependent on read head, adjustment)
• Available in lengths up to 30 m (SL130)
• High cost-efficiency. Simple installation into all machine types for wood and metalworking.

Digital scale for milling machines

• magnet technology
• Exzellente resistivity with workshop conditions
• Resistant to oil, dirt, vibrations and percussions (IP54)
• Same thermal expansion coefficient as machine tools ((11±1) x 10 -6 /°C)
• Measuring length: 150 mm up to 1600 mm
• Accuracy: ±10µm
• Resolution: 5µm
• Economical scale for digital displays

• high-magnetizable material
• 40 µm signal period
• MR technology
• sinusoidal signal
• automatic adjustment
• DC signal

The position displays LH70/71 including all standard functions that will be needed for machine tools and therefore they are all-purpose. The displays are available with 1, 2 or 3 axis and have a resolution range between 0.5 μm and 10 μm. Additional the LH71 display is freely programmable and can indicate angles with a resolution up to 1 sec.

• All-purpose for different machine tools
• Alternatively accounting of axle from Z1 and Z2 or separated displaying of Z1 and Z2
• Tool storage
• Point of reference recognition and point of reference storage
• Diameter display and value bisection method function
• Angle indicator function
• Hole circle function
• TTL-line driver input (RS422: min. phase dif. 100 ns)
• Pprogramming (only LH 71)

Compact display with numerous functions for milling machines (LH51) and turning lathes (LH52)

• Selectable display resolution
• Selectable ABS/Inc. - display
• Linear error correction
• Built-in functions: RESET, Preset, Recall, data storage, point data memory, center computation and zero point recognition
• Milling machine functions (LH51): Contact sensor and pitch diameter function
• Centre lathe functions (LH52): Stop, addition and tool storage
• Inch/metrically

Display with basic functions

• selectable display resolution
• Standard characteristics
• Inch/metrically
• Resetting/call
• Linear error compensation
• Error alarm
• self diagnosis
• Resetting on zero

Programmable multi-function display

• Programming (manual over interface): up to 480 steps
• Selectable resolution
• Selectable ABS/INC - Display
• Linear error compensation
• Functions: Resetting, pre-setting, call, data storage, point data memory, contact sensor, pitch diameter function, center computation
• RS-232C interface
• Inch/metrically