Phone: +49 35242 44510

Contact us formular:
Please fill out the services-form to contact us in the case of service. Fields marked with asterisks have to be filled out to guarantee that we can help you without any loss of time.
Name*
Company*
Street/Number*
City* ZipCode*
Phone* Fax
your email adress*

Your Question :
Security check*
(Letters repeat.)
Fields marked with * are required.
.
Sitemap


Testing of seating and upholstered furniture:

UniversaltestmaschinenFurniture testing modules with central controller

UniversalprüfmaschineFurniture testing systems with PLC controller

UniversaltestmaschinenFurniture testing systems with integrated controller

UniversaltestmaschinenOther test rigs



Furniture testing modules with central controller

Alternating bending test rig
Alternating bending test rig

Alternating bending test rig for seating furniture and upholstery

  • testing of seat and back rest according to EN 1335, EN 1728, EN 581-2, DIN 4551, BIFMA X5.1 and BSI/BS 5459
  • basic test frame with crosshead, that is height-adjustable by electric motor
  • can be equipped with 2 load-controlled or load- and position-controlled actuators (pneumatic test axes), 2 load cells
  • test loads up to 1500 / 2500 / 4500N (depending on the actuator module)
  • stroke up to 500 mm
  • large range of clamping elements and loading pads included
  • central test rig controller is required

Details

 
Alternating bending test rig
Alternating bending test rig

Alternating bending test rig for seating furniture and upholstery

  • testing of arm rests according to EN 1335, EN 1728, EN 581-2, DIN 4551, BIFMA X5.1 and BSI/BS 5459
  • basic test frame with crosshead, that is height-adjustable by electric motor
  • can be equipped with 2 load-controlled or load- and position-controlled actuators (pneumatic test axes), 2 load cells
  • test loads up to 1500/2500N (depending on the actuator module)
  • arm rest loading pads can be adjusted to the specimen
  • central test rig controller is required

Details

 
Double test rig
Double test rig

Double test rig for alternating bending tests on seating furniture, upholstery, and interlocking chairs

  • testing of seat, back and arm rests, and side to side testing according to EN 1335, EN 1728, EN 581-2, DIN 4551 und BIFMA X.5.1
  • basic test frame with crosshead, that is height-adjustable by electric motor
  • can be equipped with 4 load-controlled or load- and position-controlled actuators (pneumatic test axes), 4 load cells
  • test loads up to 1500/2500/4500N (depending on the actuator module)
  • large range of clamping elements and loading pads included
  • central test rig controller is required

Details

 
drop test rig
drop test rig

drop test rig for impact loading of seating furniture, upholstery and tables

  • testing of seat and back rest of seating furniture and upholstery, as well as tables according to DIN 4551, ISO 7173, NEN 1812, BIFMA X5.1 and BSI/BS 5459
  • basic test frame with crosshead, that is height-adjustable by electric motor, and drop test module
  • drop test rig is position-controlled with drop heights between 1 and 500mm
  • several standardised drop weights between 9.1kg and 136kg, and seat impactor are included with the basic test rig
  • large range of clamping elements
  • central test rig controller is required
  • optional: acceleration sensor for the determination of depth suspension according to EN 581-2

Details

Details

 
swivel test rig
swivel test rig

swivel tests on seating furniture and furniture casters

  • testing of casters, x-bases, substructures and gas springs on seating furniture according to DIN 4551, EN1335, NEN 1812 and BIFMA 5.1
  • equipped with 1 load-controlled actuator (pneumatic test axis), and 1 electromotive rotation axis
  • test loads up to 1500N
  • 1 load cell
  • Easy-Lock-clamping for x-base and pressure piece
  • central test rig controller is required

Details

 
Universal test field
Universal test field

Universal test field for alternating bending tests on seating furniture, upholstery, and tables

  • testing of seat, arm and back rest, and side to side testing of seating furniture and upholstery, as well as horizontal and vertical table testing according to EN 1335-3, EN 581-2, EN 1728, BIFMA X5.1, EN 527-3 and EN 581-3
  • basic test frame 2500x2500x2000 (width x length x height) can be enlarged optionally
  • can be equipped with an arbitrary number of load-controlled or load- and position-controlled actuators (pneumatic test axes)
  • test loads up to 1500/2500/4500N (depending on the actuator module)
  • load cells, large range of clamping elements and loading pads included
  • central test rig controller is required

Details

 
Multifunction test field
Multifunction test field

Multifunction test field for tests on seating furniture, upholstery, and tables

  • testing of seat, arm and back rest, and side to side testing
  • drop testing
  • tilting and drop tests
  • vertical and horizontal table testing
  • swivel tests (caster testing)
  • the test field can be configured arbitrarily

Details application 1

Details application 2

 
Linear module
Linear module

Universal linear module for cabinets, furniture casters, and doors

  • caster testing on seating furniture, mobile tables and drawer units
  • testing of revolving, tambour and sliding doors
  • testing of drawers
  • testing of furniture hinges
  • working height can be adjusted up to 1500mm

Details

Details

 
Central controller with testing software
Central controller with testing software

Central control unit with testing and evaluation software for furniture testing modules

  • arbitrary number of modules can be connected
  • simultaneous control of 5 different actuators (pneumatic test axes) with different testing tasks and parameters is possible
  • extensive testing and evaluation software
  • testing procedure can be set arbitrarily
  • visualisation of testing results with automatic logging

Details control unit

Details software

 

 

Furniture testing systems with integrated controller

NEW Alternating bending test rig
NEW Alternating bending test rig

Alternating bending test rig for seating furniture and upholstery

  • testing of seat and back rest according to new EN 1335-3:2009, EN 1728, EN 581-2, DIN 4551, BIFMA X5.1 and BSI/BS 5459
  • basic test frame with crosshead, that is height-adjustable by electric motor
  • can be equipped with 2 load-controlled or load- and position-controlled pneumatic test axes with 2 load cells 5kN
  • test loads up to 1500 / 2500 / 4500N (depending on the test axis)
  • extensive testing and evaluation software with visualisations
  • central control terminal for 2 test axes
  • moveable support for central control terminal, PC, keyboard and screen
  • large range of clamping elements and loading pads included

Details

Details nach EN1335-3:2009

 
Double test rig
Double test rig

Double test rig for alternating bending tests on seating furniture, upholstery, and interlocking chairs

  • testing of seat, back and arm rests, and side to side testing according to EN 1335, EN 1728, EN 581-2, DIN 4551 und BIFMA X.5.1
  • basic test frame with crosshead, that is height-adjustable by electric motor
  • can be equipped with 4 load-controlled or load- and position-controlled pneumatic test axes with 4 load cells 5kN
  • test loads up to 1500/2500/4500N (depending on the test axis)
  • extensive testing and evaluation software with visualisations
  • central control terminal for 5 test axes
  • moveable support for central control terminal, PC, keyboard and screen
  • large range of clamping elements and loading pads included

Details

 
drop test rig
drop test rig

drop test rig for impact loading of seating furniture, upholstery and tables

  • testing of seat and arm rests of seating furniture and upholstery, as well as tables according to DIN 4551, ISO 7173, NEN 1812, BIFMA X5.1 and BSI/BS 5459
  • basic test frame with crosshead, that is height-adjustable by electric motor, and drop test module
  • drop test rig is position-controlled with drop heights between 1 and 500mm
  • extensive testing and evaluation software with visualisations
  • central control terminal for 2 test axes
  • moveable support for central control terminal, PC, keyboard and screen
  • several standardised drop weights between 9.1kg and 136kg, and seat impactor are included with the basic test rig
  • large range of clamping elements included
  • optional: acceleration sensor for the determination of depth suspension according to EN 581-2

Details drop test rig

Details acceleration sensor

 
swivel test rig
swivel test rig

swivel tests on seating furniture and furniture casters

  • testing of casters, x-bases, substructures and gas springs on seating furniture according to DIN 4551, EN1335, NEN 1812 and BIFMA 5.1
  • equipped with 1 load-controlled pneumatic test axis, load cell 5kN and 1 electromotive rotation axis test
  • loads up to 1500N
  • extensive testing and evaluation software with visualisations
  • central control terminal for 2 test axes
  • moveable support for central control terminal, PC, keyboard and screen
  • Easy-Lock-clamping for x-base and pressure piece

Details

 
Universal test field
Universal test field

Universal test field for alternating bending tests on seating furniture, upholstery, and tables

  • testing of seat, arm and back rest, and side to side testing of seating furniture and upholstery, as well as horizontal and vertical table testing according to EN 1335-3, EN 581-2, EN 1728, BIFMA X5.1, EN 527-3 and EN 581-3
  • basic test frame 2500x2500x2000 (width x length x height) can be enlarged optionally
  • can be equipped with an arbitrary number of load-controlled or load- and position-controlled pneumatic test axes with load cells 5kN
  • test loads up to 1500/2500/4500N (depending on the test axes)
  • extensive testing and evaluation software with visualisations
  • central control terminal for 2 test axes
  • moveable support for central control terminal, PC, keyboard and screen
  • large range of clamping elements and loading pads included

Details

 
Integrated controller with testing software
Integrated controller with testing software

Integrated controller with testing and evaluation software (central supply terminal)

  • arbitrary number of furniture testing modules can be connected
  • simultaneous processing of 5 different actuators (pneumatic test axes) with different testing tasks and parameters is possible
  • extensive testing and evaluation software
  • testing procedure can be set arbitrarily
  • visualisation of testing results with automatic logging

Details control unit

Details software

 

 

Furniture testing systems with PLC controller

Alternating bending test rig
Alternating bending test rig

Alternating bending test rig for seating furniture

  • testing of seat and back rest according to EN1335, EN581-2 and BIFMA X5.1
  • PLC controller; number of cycles and cycle time can be set arbitrarily
  • Basic test frame 1000x1600x2300 (width x length x height)
  • 1 pneumatic cylinder 80x320, test load up to 2500N
  • 1 pneumatic cylinder 50x500, test load up to 1000N
  • large range of clamping elements and loading pads included

Details

 
Alternating bending test rig
Alternating bending test rig

Alternating bending test rig for seating furniture

  • static testing of back rest according to BIFMA X5.1 PLC
  • controller; number of cycles and cycle time can be set arbitrarily
  • Basic test frame 1000x1600x2300 (width x length x height)
  • 1 pneumatic cylinder 63x500, Prüfkraft bis 1500N
  • large range of clamping elements and loading pads included

Details

 
Alternating bending test rig
Alternating bending test rig

Alternating bending test rig for seating furniture

  • side to side testing of seats according to EN1335, EN581-2 and BIFMA X5.1
  • PLC controller; number of cycles and cycle time can be set arbitrarily
  • Basic test frame 1000x1600x1200 (width x length x height)
  • 2 pneumatic cylinders 80x320, test load up to 2500N
  • different fastening elements
  • local loading pad 100x100mm

Details

 
drop test rig
drop test rig

drop test rig for impact loading of seating furniture, upholstery and tables

  • testing of seat and arm rests of seating furniture and upholstery, as well as tables according to DIN 4551, ISO 7173, NEN 1812, BIFMA X5.1 and BSI/BS 5459
  • basic test frame with crosshead, that is height-adjustable by electric motor, and drop test module
  • drop test rig is position-controlled with drop heights between 1 and 500mm
  • test is carried out automatically by a PLC after the parameters are set
  • connection between controller and PC and transmission of test data is done via a RS 485-interface
  • several standardised drop weights between 9.1kg and 136kg, and seat impactor are included with the basic test rig
  • large range of clamping elements included
  • optional: acceleration sensor for the determination of depth suspension according to EN 581-2

Details drop test rig

Details drop test rig

Details acceleration sensor

 
Universal test field
Universal test field

Universal test field for alternating bending tests on seating furniture, upholstery, and tables

  • testing of seat, arm and back rest, and side to side testing of seating furniture and upholstery, as well as horizontal and vertical table testing
  • PLC controller; number of cycles and cycle time can be set arbitrarily
  • basic test frame 2400x2400x2000 (width x length x height) can be enlarged optionally
  • can be equipped with an arbitrary number of load-controlled cylinders
  • prefered model: 2 pneumatic cylinders 50x500, test load up to 1000N and 2 pneumatic cylinders 50x800, test load up to 2500N
  • large range of clamping elements and loading pads included

Details

 

 

Other test rigs for seating furniture

Test rig for stability testing
Test rig for stability testing

Testing of stability of seating furniture

  • table for stability testing 1000x1800x800, (width x length x height)
  • pneumatically moveable weight basket for application of test loads
  • stroke of the weight basket up to 350mm
  • maximum loading of the weight basket 150kg
  • according to EN1022, EN1729 and BIFMA X5.1

Details

 
Test rig for tilting and drop tests
Test rig for tilting and drop tests

Tilting and drop tests on seating furniture

  • basic test frame 1400x1000x1300 (width x length x height) can be enlarged optionally
  • PLC controller; number of cycles and cycle time can be set arbitrarily
  • sensor automatically controls drop height (30mm are common)
  • flexible clamping of seating furniture
  • loading pads for frontal and lateral loading included
  • according to DIN 68878/1

Details

 
Universal testing machine for furniture components
Universal testing machine for furniture components

Universal testing machine for tests on furniture components, and materials

  • tests on X-bases, swivel joints, gas springs, foamed materials, plastic parts, cover fabrics
  • dimensions 1000x1000x1900 (width x length x height)
  • protective glazing
  • maximum test load 20kN
  • extensive testing and evaluation software with visualisation

Details

 
Measuring station
Measuring station

3D-measuring station for seating furniture

  • determination of geometry/ ergonomics of seating furniture before and after long-term tests according to EN 1335, EN1728, EN1729 and EN581-2
  • pneumatic lifting cylinder unit for simple positioning of the seat loading pad
  • 3 digital measuring systems
  • standardised seat loading pad according to EN 1335 and DIN 4551 with 64kg weight
  • simple determination of the point “S” on the back rest and of the point “A” on the seat with 2 laser pointers
  • optional: laser extensometer with stand for determining distances and differences on seating furniture

Details 3D-measurement device

Details laser distance finder

 
Vibration test rig
Vibration test rig

Vibration test rig for seating furniture and tables

  • determination of vibration and damping, with graphic representation in a travel-time-diagram
  • automatic calculation of the characteristics S1, S2, D, K and S1k
  • test rig can be installed into any test field or free-standing
  • floating axle is height-adjustable up to 2000 mm above ground
  • different pendulum hammers can be installed due to simple clamping system with quick clamping system
  • impact height can be determined precisely by 1° due to the integrated angular scale

Details

 
Test portal for drop tests
Test portal for drop tests

Moveable drop test stand for impact loading on seating furniture, upholsteries, tables and beds

  • testing of seat and arm rests of seating furniture and upholstery
  • testing of tables, stools, beds, cabinets
  • test portal moveable with a clear height of 2000mm
  • drop test rig position-controlled with a drop height of 1-770mm
  • test is carried out automatically by a PLC after the parameters are set
  • several standardised drop weights between 9.1kg and 136kg, and seat impactor are included with the basic test rig

Details

 
Testing machine for foamed materials
Testing machine for foamed materials

Special testing machine for foamed materials in seating furniture and upholsteries

  • determination of indentation hardness, and compression strength and deformation characteristics
  • automatic calculation of characteristic values and graphic representation
  • can be installed into a test field or used as desktop machine
  • maximum test load 5kN
  • different loading pads

Details