Phone: +49 35242 44510
Contact us formular:
Please fill out the services-form to contact us in the case of service. Fields marked with asterisks have to be filled out to guarantee that we can help you without any loss of time.
Name*
Company*
Street/Number*
City*	ZipCode*
Phone*	Fax
your email adress*
Your Question :
Security check* (Letters repeat.)

Fields marked with * are required.

.

Testing of tables and upholstered furniture ..

Furniture testing modules with central controller	Furniture testing systems with integrated controller
Furniture testing systems with PLC controller	Other test rigs

Furniture testing modules with central controller

Universal test field

Universal test field

Universal test field for alternating bending tests on seating furniture, upholstery, and tables

testing of seat, arm and back rest, and side to side testing of seating furniture and upholstery, as well as horizontal and vertical table testing according to EN 1335-3, EN 581-2, EN 1728, BIFMA X5.1, EN 527-3 and EN 581-3
basic test frame 2500x2500x2000 (width x length x height)
can be enlarged optionally can be equipped with an arbitrary number of load-controlled or load- and position-controlled actuators (pneumatic test axes)
test loads up to 1500/2500/4500N (depending on the actuator module)
load cells, large range of clamping elements and loading pads included
central test rig controller is required

Central controller with testing software

Central controller with testing software

Central control unit with testing and evaluation software for furniture testing modules

arbitrary number of modules can be connected
simultaneous control of 5 different actuators (pneumatic test axes) with different testing tasks and parameters is possible
extensive testing and evaluation software
testing procedure can be set arbitrarily
visualisation of testing results with automatic logging

Details control unit

Details software

Furniture testing systems with integrated controller

Universal test field

Universal test field

Universal test field for alternating bending tests on seating furniture, upholstery, tables, and cabinets

testing of seat, arm and back rest, and side to side testing of seating furniture and upholstery, as well as horizontal and vertical table testing according to EN 1335-3, EN 581-2, EN 1728, BIFMA X5.1, EN 527-3 and EN 581-3
basic test frame 2500x2500x2000 (width x length x height) can be enlarged optionally
can be equipped with an arbitrary number of load-controlled or load- and position-controlled pneumatic test axes with load cells 5kN
test loads up to 1500/2500/4500N (depending on the test axes)
extensive testing and evaluation software with visualisations
central control terminal for 5 test axes
moveable support for central control terminal, PC, keyboard and screen
large range of clamping elements and loading pads included

Table test stand

Table test stand

test field for horizontal and vertical table testing, testing of cabinets

horizontal and vertical testing of tables, cabinet testing
basic test frame 2500x2500x2000 (width x length x height) can be enlarged optionally
can be equipped with an arbitrary number of load-controlled or load- and position-controlled pneumatic test axes with load cells 5kN
test loads up to 1500/2500/4500N (depending on the test axes)
extensive testing and evaluation software with visualisations
central control terminal for 5 test axes
moveable support for central control terminal, PC, keyboard and screen
large range of clamping elements and loading pads included

Integrated controller with testing software

Integrated controller with testing software

Integrated controller with testing and evaluation software (central supply terminal)

arbitrary number of furniture testing modules can be connected
simultaneous processing of 5 different actuators (pneumatic test axes) with different testing tasks and parameters is possible
extensive testing and evaluation software
testing procedure can be set arbitrarily
visualisation of testing results with automatic logging

Details control unit

Details software

Furniture testing systems with PLC controller

Universal test field

Universal test field

Universal test field for alternating bending tests on seating furniture, upholstery, tables, and cabinets

testing of seat, arm and back rest, and side to side testing of seating furniture and upholstery, as well as horizontal and vertical table testing
PLC controller; number of cycles and cycle time can be set arbitrarily
basic test frame 2400x2400x2000 (width x length x height) can be enlarged optionally
can be equipped with an arbitrary number of load-controlled cylinders
prefered model: 2 pneumatic cylinders 50x500, test load up to 1000N and 2 pneumatic cylinders 50x800, test load up to 2500N
large range of clamping elements and loading pads included

Table test stand

Table test stand

test field for horizontal and vertical table testing, testing of cabinets

horizontal and vertical testing of tables according to EN 527-3, EN581-3 and BIFMA X5.1
PLC controller; number of cycles and cycle time can be set arbitrarily
basic test frame 2500x2500x2000 (width x length x height) can be enlarged optionally
equipped with 2 pneumatic test cylinders 50x320, test load up to 1000N
equipped with 1 pneumatic test cylinder 80x500, test load up to 2500N
can be equipped with 4 cylinders in total
different loading pads

Other test rigs

Vibration test rig

Vibration test rig

Vibration test rig for seating furniture and tables

determination of vibration and damping, with graphic representation in a travel-time-diagram
automatic calculation of the characteristics S1, S2, D, K and S1k
test rig can be installed into any test field or free-standing
floating axle is height-adjustable up to 2000 mm above ground
different pendulum hammers can be installed due to simple clamping system with quick clamping system
impact height can be determined precisely by 1° due to the integrated angular scale

Horizontal impact testing

Horizontal impact testing

Horizontal Shock Testing Device (Basketball Test)

stability testing of seating furniture, tables, stools and drawer units according to BS 4875-8 and EN 13150
testing device is a horizontal shock testing device (basketball), which is blown up to a pressure of 73.5 +/- 5kPa and hangs on flexible wire ropes with a length of 850mm
total weight of the shock testing device: 50kg
stop with oscillation height of 40mm
manual height adjustment of the shock device allows for impact heights between 200mm and 1650mm
the device can be installed on a base plate of into a test field (oder numbers 40-900-077 or 40-920-177)