• basic version for use on pendulum machine
  
  
• high flexibility for use in impact testing
  
  
• easily mounted and removed by simple clamp system
  
  
• suitable center of gravity

• aluminium weight disks acc. to EN with 350 mm diameter, 48 mm height and 10 kg weight for furniture stability tests
  
  
• steel weight disks, 5 / 10 kg, with ball grips and 32 mm bore, as additional weights used among others as seat weights
  
  

Loading pads are all equipped with an adapter for the 20 mm clamp system and a Cardan joint to decouple the load cell from bending moments

Standard types: 

• loading pad round, 100 mm diameter
  
  
• loading pad round, 200 mm diameter
  
  
• seat dummies acc. to DIN/EN and NEN, GFK or polyamide full material
  ram rectangular, 250x200 mm (EN), GFK or polyamide full material
  
  
• loading pad rectangular, 300x250 mm (EN), GFK or polyamide full material
  
  
• arm rest loading pad with adjustable load point
  
  
• loading pad for foot rest (steel)

• drop weights for impact and high-pressure tests, adapted to impact test stand
  
  
• seat impactor drop weight with spring mechanism, 25 kg
  
  
• drop weight 8" acc. to BIFMA, 9.1 kg
  
  
• drop weight 16" acc. o BIFMA, 36 to 136 kg (variably equippable)
  
  
• drop weight 400 mm acc. to DIN 4551, 75 kg
  
  
• all drop weights have a connection 28 to10 mm

• continuous adjustable fixture height, adjustable between 100mm and 300mm
• u-shaped fixture for the X-base center pillar
• easy clamping of X-base (diameter from 35mm up to 115mm)

• template according to ISO 7173 and EN 1728
  
  
• evaluation of load points „A“ and „B“
  
  
• marking of load point „C“
  
  
• overall weight (including integrated additional weight) = 20kg

• Pneumatic cylinder (Festo), round cylinder with tie rods
• Load-controlled, or load and position-controlled actuators (pneumatic test axes) with a 5 kN load cell and 20 mm clamping adapter for easy connection and exchange of pressure pieces
• Test loads of 1500 N / 2500 N / 4500 N (depending on the piston diameter)
• Piston stroke 500 mm by default, up to 1000 mm are possible
• Piston can be chosen arbitrarily
• Absolute position measurement
• Controller for pneumatic actuator via CAN-BUS
• Pneumatic controller unit
• Movement adapter for different actuators, swivelling or rotating and swivelling

• according to DIN EN 716-2