Special Testing Machines
Determination of connection forces on welded structures in automotive industry
Universal testing machine inspekt C 50kN in C-frame configuration
- Branch: automotive industry
In the automotive industry, welded sheet connections are tested for their mechanical strength. The testing machine Inspekt C 50 kN is available specifically for this purpose...
Testing insulation materials
Universal testing machine inspekt S 20kN with three test areas
- Branch: plastics industry
Life without thermal insulation materials is inconceivable nowadays. In addition to typical material properties, key mechanical parameters determined of insulation materials also include tensile strength, expansion and compressive resistance and deformation behaviour...
Horizontal tensile testing of cables, wires, chains, etc.
Universal testing machine Inspekt H-L 600kN with horizontal test area
- Branch: electrical industry
The universal testing machine inspekt H-L 600kN was developed as a horizontal material testing system for testing products with high strengths and measurement lengths, such as chains, cables, wires or finished products with extensive installation lengths...
Vertex pressure testing of GRP pipes
Universal testing machine Inspekt SH 500kN with adjustable test space
- Branch: plastics industry
Pipe systems from centrifugally cast glass fibre-reinforced polyester resin are used primarily in the water and waste water sectors. The pipe diameter can vary here between 150mm and 4000mm...
Hot stamping of microstructures
Precision forming machine Inspekt 600kN P.U.M.A.
- Branch: research
Within the scope of a research project with the Fraunhofer Institute IWU in Chemnitz, the fundamental feasibility of a technology for the hot stamping of non-metallic materials in the high temperature range was examined...
Testing heavy current isolators
Universal testing machine inspekt SA-4S 600kN with central loading spindle
- Branch: electrical industry
Isolators are used in a broad range of energy-related applications. They are subjected to a wide spectrum of electrical and mechanical influences under real ambient conditions during operation...
Testing flooring elements
Universal testing machine inspekt S Vario 30/50kN with mobile loading axle
- Branch: wood and plastics industry
Flooring elements and their support systems are subjected to extreme mechanical loading in the form of compressive and bending forces...
Testing foams
Universal testing machine Inspekt S 5kN with central loading
- Branch: plastics industry
Soft elastic foams are primarily used for damping and insulation. Almost all plastics are suitable for foaming...
Calibration of force reference standards
Reference standard measurement machine Inspekt K 600kN
- Branch: Verification laboratories, calibration services
Load cells, which are used for example in classic material testing machines, must be checked periodically for their measuring accuracy with reference force standards...
Universal shaft testing in the automotive industry
Universal testing machine Inspekt S-L 250kN in horizontal configuration
- branch: automotive industry
Automotive universal shafts and drive trains are subject to considerable compressive and tensile mechanical loading during use...
Nominal ring stiffness testing of plastic pipes
Universal testing machine inspekt S 50kN with a working area width of 750mm
- Branch: plastics industry
The nominal ring stiffness characterises the strength behaviour of plastic pipes in the construction, electrical and water/waste water industries and is subject to European standards...
