1D-Length measuring device

Iten number: 33-011-118

condition as new, available immediately

1D measuring device light

Measuring length (L): 1150 mm
Measuring accuracy: approx. ± (0.06 mm + 0.02 mm x L) L=measuring length in m (at 20°C)
Load capacity: max. 15 kg workpiece weight
Width: 1300 mm
Weight: approx. 24 kg

Accessories included:

2 workpiece support 5, prismatic 130°, up to D150mm
1 fixed fence 5, prismatic 130°, up to D150mm
1 mobile fence 5, prismatic 130°, up to D150mm
1 digital counter LG20-1
1 base plate light gray, 1600x500x40mm with material holder

Gebrauchte Längenmessvorrichtung

Print offer

Request a quotation

Example photo: Testing machine inspekt table 100 kN with long-travel extensometer

Tensile testing machine inspekt table 100 kN

Item number: 10-031-102

second hand
year of manufacture 2017

Scope of delivery:

Testing machine with measuring and control electronics, incl. R 100 kN load cell, manual control RMC6, tool connection R60/30, floor-standing machine (with substructure table), external digital controller EDC220, wedge grips 14-096-100 and jaws 14-096-715 flat 0-15mm, round 5-15mm 14-096-815, (without coupling slide R36/18) , long travel expander MFX200, 15-100-031, year 2017 SN5115071702 and holder MFX

Options necessary for operation:

LabMaster user software, PC and, if necessary, protective devices

Price and delivery time on request

Print offer

Request a quotation

Material testing machine for tensile test on metal

Picture example: Second-hand tensile testing machine inspekt table 100 kN

Tensile testing machine inspekt table 100 kN

Item number: 10-031-104

second hand
year of manufacture: 2021

Scope of delivery:

Testing machine with measuring and control electronics, incl. 100 kN load cell and hand control RMCi7

Options necessary for operation:

Adapter set, grips, LabMaster user software, PC and, if necessary, protective devices

Price and delivery time on request

Print offer

Request a quotation

Second-hand tensile testing machine Zwick Z005

Tensile testing machine Zwick Z005, 5 kN

Item number: 10-900-138

second hand

Scope of delivery:

Testing machine with measuring and control electronics, incl. new 5 kN load cell

Options necessary for operation:

Adapter set, grips, LabMaster user software, PC and, if necessary, protective devices

Price and delivery time on request

Print offer

Request a quotation

Second hand testing machine inspekt desk 20 kN

Tensile testing machine inspekt desk 20 kN

Item number: 10-900-093

second hand

The testing machine will be modernized with current control and measurement electronics based on EDC.

Scope of delivery:

Testing machine with measuring and control electronics, integrated control panel, incl. one new 20 kN load cell

Options necessary for operation:

Adapter set, grips, LabMaster user software, PC and, if necessary, protective devices

Price and delivery time on request

Print offer

Request a quotation

Second-hand tensile testing machine 50 kN horizontal

Tensile testing machine inspekt table 50 kN H - horizontal

Item number: 10-030-959

second hand

Scope of delivery:

Horizontal testing machine with measuring and control electronics
new 50 kN load cell
manual operation
safety door with electrical interlock (to open upwards) - on request also available without safety door

Options necessary for operation:

Adapter set, grips, LabMaster user software, PC

Price and delivery time on request

Print offer

Request a quotation

Tensile testing machine FRANK 81816, 10 kN

second hand

Scope of delivery:

Testing machine with measuring and control electronics

Options necessary for operation:

Adapter set, load cell, grips, LabMaster user software, PC and, if necessary, protective devices

Price and delivery time on request

Print offer

Request a quotation

1D Length measuring device

Item number: 33-011-238

as new (year of manufacture 2021)

Technical data:

Measuring length (L): 2350 mm
Measuring accuracy: approx. ± (0.06mm + 0.02mm x L)
load capacity: max. 10 kg workpiece weight
width: 2500 mm
weight: approx. 30 kg

consisting of:

base carrier made of light metal with T-slot support and precision roller guide
movable measuring carriage (for mounting stops, probes, optics, etc.)
Magnescale® SL130 magnetic incremental measuring system
factory calibration with protocol
M3 display unit with table base (article number: 33-011-604)
Fixed stop 5 (article number: 33-011-805)
Mobile stop 5 (article number: 33-011-905)
4 x workpiece support 5, L=16 mm (article number: 33-011-705)

Price and delivery time on request

Print offer

Request a quotation

Second hand hyraulic testing machine 400 kN EU 40

400 kN Hydraulic testing machine EU40

Item number: 10-910-007

second hand

The testing machine is modernized with a hydraulic power unit 380 bar with current control and measuring electronics based on EDC.

Scope of delivery:

Testing machine with measurement and control electronics

Options necessary for operation:

Load cell, adapter set, grips, hand control for manual setup operation, LabMaster user software, PC and, if necessary, protective devices

Price and delivery time on request

Print offer

Request a quotation

Testing machine for glass bending tests according to EN 1288-3 and stamp pressure tests according to ISO 614

Item number: 10-012-516

second-hand, good condition

The testing machine is modernized with current control and measuring electronics based on EDC.

Mechanical construction:

backlash-free ball screw (centrally located above test area), drive via AC motor, capacity Fmax = 50kN (tension/compression)
1 working chamber (up to nominal load), maximum working chamber width (free passage) 2000 mm, maximum working chamber depth approx. 1300 mm, 3 sides fully closed
test stroke without test tools: 500 mm
Work table height (above floor): approx. 760 mm plus fixtures (test tools, fixtures)

Dimensions and weights:

Machine: WxDxH approx. 2475 mm x 1800 mm x 2400 mm, 1,300 kg
Controller: WxDxH approx. 290 mm x 290 mm x 650 mm / 30kg

Standard functions:

force- displacement- strain controlled, overload protection, automatic force calibration, control panel for manual operation
Specimen break detector, return function, manual fine positioning of the crosshead.

Data processing: USB 2.0 interface or LAN

data transmission rate to PC:50Hz (standard), optionally higher data acquisition frequency via special software add-on module and data acquisition cards
internal data processing rate 2 ms

Connection conditions: 115/230 VAC, 0,7 kVA, 50/60 Hz, 5- 40°C, 20- 80 % humidity

Scope of delivery: Testing machine with measurement and control electronics, hand control for manual setup operation, protective cover with electrical interlock, specimen collection container.

Options required for operation: Load cell, adapter set, test tools, LabMaster user software, PC

Price and delivery time on request

Print offer

Request a quotation