Logo
 
 
 
Glass testing machine for glass bending tests according to EN 1288-3 and stamp pressure tests according to ISO 614

Testing machine for glass bending tests according to EN 1288-3 and stamp pressure tests according to ISO 614

Item number: 10-012-516

Item number: 10-012-516

  • second-hand, good condition

The testing machine is modernized with current control and measuring electronics based on EDC.

Mechanical construction:

  • backlash-free ball screw (centrally located above test area), drive via AC motor, capacity Fmax = 50kN (tension/compression)
  • 1 working chamber (up to nominal load), maximum working chamber width (free passage) 2000 mm, maximum working chamber depth approx. 1300 mm, 3 sides fully closed
  • test stroke without test tools: 500 mm
  • Work table height (above floor): approx. 760 mm plus fixtures (test tools, fixtures)

Dimensions and weights:

  • Machine: WxDxH approx. 2475 mm x 1800 mm x 2400 mm, 1,300 kg
  • Controller: WxDxH approx. 290 mm x 290 mm x 650 mm / 30kg

Standard functions:

  • force- displacement- strain controlled, overload protection, automatic force calibration, control panel for manual operation
  • Specimen break detector, return function, manual fine positioning of the crosshead.

Data processing: USB 2.0 interface or LAN

  • data transmission rate to PC:50Hz (standard), optionally higher data acquisition frequency via special software add-on module and data acquisition cards
  • internal data processing rate 2 ms

Connection conditions: 115/230 VAC, 0,7 kVA, 50/60 Hz, 5- 40°C, 20- 80 % humidity

Scope of delivery: Testing machine with measurement and control electronics, hand control for manual setup operation, protective cover with electrical interlock, specimen collection container.

Options required for operation: Load cell, adapter set, test tools, LabMaster user software, PC

Price and delivery time on request

  • second-hand, good condition

The testing machine is modernized with current control and measuring electronics based on EDC.

Mechanical construction:

  • backlash-free ball screw (centrally located above test area), drive via AC motor, capacity Fmax = 50kN (tension/compression)
  • 1 working chamber (up to nominal load), maximum working chamber width (free passage) 2000 mm, maximum working chamber depth approx. 1300 mm, 3 sides fully closed
  • test stroke without test tools: 500 mm
  • Work table height (above floor): approx. 760 mm plus fixtures (test tools, fixtures)

Dimensions and weights:

  • Machine: WxDxH approx. 2475 mm x 1800 mm x 2400 mm, 1,300 kg
  • Controller: WxDxH approx. 290 mm x 290 mm x 650 mm / 30kg

Standard functions:

  • force- displacement- strain controlled, overload protection, automatic force calibration, control panel for manual operation
  • Specimen break detector, return function, manual fine positioning of the crosshead.

Data processing: USB 2.0 interface or LAN

  • data transmission rate to PC:50Hz (standard), optionally higher data acquisition frequency via special software add-on module and data acquisition cards
  • internal data processing rate 2 ms

Connection conditions: 115/230 VAC, 0,7 kVA, 50/60 Hz, 5- 40°C, 20- 80 % humidity

Scope of delivery: Testing machine with measurement and control electronics, hand control for manual setup operation, protective cover with electrical interlock, specimen collection container.

Options required for operation: Load cell, adapter set, test tools, LabMaster user software, PC

Price and delivery time on request

 
 

Safe test results:
certifications