Item number: 10-012-516
Item number: 10-012-516
- second-hand, good condition
Mechanical construction:
- backlash-free ball screw (centrally located above test area), drive via AC motor, capacity Fmax = 50kN (tension/compression)
- test stroke without test tools: 500 mm
Movement speeds:
- Test speed 0.005 - 500 mm/min, return speed 500 mm/min
Load measurement:
- incl. load cell ring design 50kN, limit load 150%, breaking load 300%, shear load 50%, 3m cable with sensor plug, with base, connection M16 female thread (on both sides)
- incl. factory calibration class 1 according to DIN EN ISO 7500 with protocol (class 0.5 optional, DAkkS calibration optional)
Measuring range: in the range 0.1 - 100 % of the nominal load class 1 (optional class 0.5), (+/- 1 % of the displayed value in accordance with DIN 51221 class 1, EN 10002-2, ASTM E4 , ISO 7500 class 1) Force measurement resolution: 24 digits
Crosshead displacement measurement:
- Incremental rectangular input with encoder monitoring, storage of crosshead position
Standard functions:
- force- displacement- strain controlled, overload protection, automatic force calibration, control panel for manual operation
- Specimen break detector, return function, manual fine positioning of the crosshead.
Data processing: USB 2.0 interface or LAN
- data transmission rate to PC:50Hz (standard), optionally higher data acquisition frequency via special software add-on module and data acquisition cards
- internal data processing rate 2 ms
- 3 free slots available for expansion cards (1-channel analog cards or 2-channel digital cards) for additional sensors
Connection conditions: 115/230 VAC, 0,7 kVA, 50/60 Hz, 5- 40°C, 20- 80 % humidity
Optional accessories required for operation (not included in the scope of delivery):
- -Hand control
- Test frame
- LabMaster testing software
- PC
- Testing tools
Price and delivery time on request
- second-hand, good condition
Mechanical construction:
- backlash-free ball screw (centrally located above test area), drive via AC motor, capacity Fmax = 50kN (tension/compression)
- test stroke without test tools: 500 mm
Movement speeds:
- Test speed 0.005 - 500 mm/min, return speed 500 mm/min
Load measurement:
- incl. load cell ring design 50kN, limit load 150%, breaking load 300%, shear load 50%, 3m cable with sensor plug, with base, connection M16 female thread (on both sides)
- incl. factory calibration class 1 according to DIN EN ISO 7500 with protocol (class 0.5 optional, DAkkS calibration optional)
Measuring range: in the range 0.1 - 100 % of the nominal load class 1 (optional class 0.5), (+/- 1 % of the displayed value in accordance with DIN 51221 class 1, EN 10002-2, ASTM E4 , ISO 7500 class 1) Force measurement resolution: 24 digits
Crosshead displacement measurement:
- Incremental rectangular input with encoder monitoring, storage of crosshead position
Standard functions:
- force- displacement- strain controlled, overload protection, automatic force calibration, control panel for manual operation
- Specimen break detector, return function, manual fine positioning of the crosshead.
Data processing: USB 2.0 interface or LAN
- data transmission rate to PC:50Hz (standard), optionally higher data acquisition frequency via special software add-on module and data acquisition cards
- internal data processing rate 2 ms
- 3 free slots available for expansion cards (1-channel analog cards or 2-channel digital cards) for additional sensors
Connection conditions: 115/230 VAC, 0,7 kVA, 50/60 Hz, 5- 40°C, 20- 80 % humidity
Optional accessories required for operation (not included in the scope of delivery):
- -Hand control
- Test frame
- LabMaster testing software
- PC
- Testing tools
Price and delivery time on request
