Item number: 10-012-516
Item number: 10-012-516
- second-hand, good condition
The testing machine is modernized with current control and measuring electronics based on EDC.
Mechanical construction:
- backlash-free ball screw (centrally located above test area), drive via AC motor, capacity Fmax = 50kN (tension/compression)
- 1 working chamber (up to nominal load), maximum working chamber width (free passage) 2000 mm, maximum working chamber depth approx. 1300 mm, 3 sides fully closed
- test stroke without test tools: 500 mm
- Work table height (above floor): approx. 760 mm plus fixtures (test tools, fixtures)
Dimensions and weights:
- Machine: WxDxH approx. 2475 mm x 1800 mm x 2400 mm, 1,300 kg
- Controller: WxDxH approx. 290 mm x 290 mm x 650 mm / 30kg
Standard functions:
- force- displacement- strain controlled, overload protection, automatic force calibration, control panel for manual operation
- Specimen break detector, return function, manual fine positioning of the crosshead.
Data processing: USB 2.0 interface or LAN
- data transmission rate to PC:50Hz (standard), optionally higher data acquisition frequency via special software add-on module and data acquisition cards
- internal data processing rate 2 ms
Connection conditions: 115/230 VAC, 0,7 kVA, 50/60 Hz, 5- 40°C, 20- 80 % humidity
Scope of delivery: Testing machine with measurement and control electronics, hand control for manual setup operation, protective cover with electrical interlock, specimen collection container.
Options required for operation: Load cell, adapter set, test tools, LabMaster user software, PC
Price and delivery time on request
- second-hand, good condition
The testing machine is modernized with current control and measuring electronics based on EDC.
Mechanical construction:
- backlash-free ball screw (centrally located above test area), drive via AC motor, capacity Fmax = 50kN (tension/compression)
- 1 working chamber (up to nominal load), maximum working chamber width (free passage) 2000 mm, maximum working chamber depth approx. 1300 mm, 3 sides fully closed
- test stroke without test tools: 500 mm
- Work table height (above floor): approx. 760 mm plus fixtures (test tools, fixtures)
Dimensions and weights:
- Machine: WxDxH approx. 2475 mm x 1800 mm x 2400 mm, 1,300 kg
- Controller: WxDxH approx. 290 mm x 290 mm x 650 mm / 30kg
Standard functions:
- force- displacement- strain controlled, overload protection, automatic force calibration, control panel for manual operation
- Specimen break detector, return function, manual fine positioning of the crosshead.
Data processing: USB 2.0 interface or LAN
- data transmission rate to PC:50Hz (standard), optionally higher data acquisition frequency via special software add-on module and data acquisition cards
- internal data processing rate 2 ms
Connection conditions: 115/230 VAC, 0,7 kVA, 50/60 Hz, 5- 40°C, 20- 80 % humidity
Scope of delivery: Testing machine with measurement and control electronics, hand control for manual setup operation, protective cover with electrical interlock, specimen collection container.
Options required for operation: Load cell, adapter set, test tools, LabMaster user software, PC
Price and delivery time on request
