Logo
 
 
 
Testing machine for wire testing
Reverse bend testing machine for wire testing - detail
Testing machine for wire testing in detail
Reverse bend testing machine for wire testing - detail
Testing machine for wire testing
Reverse bend testing machine for wire testing - detail
Testing machine for bending tests on wires according to DIN 51211 and ISO 7801
Reverse bend testing machine

Wire testing machine

Reverse bend testing machine 180° for wire samples

The facility is used for bending fatigue tests according to DIN 51211 and ISO 7801 on wires with diameters of 0.3 - 10.0mm. The wire samples are bent with a 90° angle to the left and to the right. The lower end of the wire is clamped into a screw terminal and guided through a pair of bending rolls. The rolls ensure bending defined by the wire diameter. The upper end of the wire is clamped into a movable, motor-driven bending arm. The bending arm is driven by a servomotor. The testing facility is adjustable according to the standard indicated above.

The pair of bending rollers ensures a defined bending depending on the wire diameter. The bending roller pairs can be exchanged.

The upper end of the wire is clamped in a movable, motor-driven bending arm. The bending arm is driven by a servo motor. The test length is adjustable according to the standard.

Search by industry and material


Would you like to know more about this test application? Or are you looking for a similar or even a completely different testing solution? Then write to us.

Send request
 

Safe test results:
certifications