Calibration machine for external force sensors
Calibration with universal testing machines from Hegewald & Peschke
Beside the application for classical tensile, compression and bending tests universal testing machines from the Hegewald & Peschke Meß- und Prüftechnik GmbH can also be used as calibration machines. For the application of the universal testing machines as calibration machines the Hegewald & Peschke MPT GmbH has developed the module "calibration" in its in-house material testing software LabMaster.
Measuring station
3D-measuring station for seating furniture
- determination of geometry/ ergonomics of seating furniture before and after long-term tests according to EN 1335,
- EN 1728, EN 1729, EN 581-2-3, EN 13761, DIN 68878 and BIFMA X5.1
- pneumatic lifting cylinder unit for simple positioning of the seat loading pad
Gauge DL-BR
Gauges suitably for installation in machines
- magnetic principle
- Excellent resistivity on workshop conditions (IP65)
- Resistant to oil and dust
- Integrated zero point
- A/B phase and zero point output signal by open Collector
- Measuring range: 10 mm, 30 mm and 60 mm
- Simple assembly
Fatigue testing of metals - VHCF test
Universal testing machine Inspekt 20 kN with VHCF device
- Branch: Metal and Steel industry
The growing demand for efficient lightweight construction in various fields of application demands the use of modern materials with ever increasing numbers of load cycles. Research and development, and especially testing technology, present a number of new challenges.
Universal testing machine for furniture components
Universal testing machine for tests on furniture components, and materials
- tests on X-bases, swivel joints, gas springs, foamed materials, plastic parts, cover fabrics
- dimensions 1000x1000x1900 (width x length x height)
- protective glazing
Determination of tensile and flexural strength of metals and non-metals
Universal testing machine Inspekt 600kN with lateral test room 200kN
- Branch: Metal and Steel Industry
The testing system includes a universal testing machine Inspekt 600kN with a lateral testing area and a 3-point bending bench 250kN as well as a hydraulic clamping tool 600kN and a fully automatic long distance extension measuring device MFL 300-B.
Testing machine for foamed materials
Special testing machine for foamed materials in seating furniture and upholsteries
- determination of indentation hardness, and compression strength and deformation characteristics
- automatic calculation of characteristic values and graphic representation
- can be installed into a test field or used as desktop machine
Determination of fracture mechanics
Universal testing machine Inspekt 100 kN
- Branch: Metal and steel branch
Components may already show cracks or similar defects during the manufacturing process. Using static tests on deeply cracked specimens to determine fracture toughness, manufacturers and users can prevent material failure through controlled crack growth, monitoring and - if necessary - maintenance/repair.
Pendulum stroke test
Pendulum stroke testing for seating furniture and tables
- determination of deflection, impact, absorption and damping, with graphic representation in a travel-time-diagram according to EN 581, EN 716, EN 1130, EN 1153, prEN 518, EN 1728 , EN 12221, EN 12227, EN 12727, ENV1178
- automatic calculation of the characteristics S1, S2, D, K and S1k
- test rig can be installed into any test field or free-standing
Testing of sandwich panels
Universal testing machine Inspekt 150 kN
- Branch: Research and Development, Textile Industry, Plastics Industry
With this testing system consisting of a universal testing machine Inspekt 150 kN, a 3-point bending bench and further testing devices, various standard-compliant tests on sandwich composites can be carried out.
Test rig for car seats
Test rig for vertical und horizontal test of car seats. 1 electromechanical actuator, without loading pads, including force sensor. Test procedure supported by comprehensive software.
Testing of electronic components
Universal testing machine Inspekt table 20kN
- Industry sector: Electrical Industry
With this extended universal testing machine Inspekt table 20 kN various components can be tested.
Testing of metal components
Universal testing machine Inspekt 100 kN
- Industry sector: Metal Industry
The testing machine is equipped with a hydraulic clamping tool, a rear protective wall and a MFX200 long-stroke extensometer.
Testing of reinforcing steel
Universal testing machine Inspekt 400 kN
- Branch: Building Industry, Metal and Steel Industry
This universal testing machine Inspekt with a maximum test load of 400 kN can be used for bending and tensile tests on reinforcing steel.
Testing of screws according to standard
Universal testing machine inspekt 250 kN
- Branch: Metal and Steel Industry
This universal testing machine inspekt 250 kN can be used for testing screws.
Testing of textile materials and geotextiles
Universal testing machine inspekt 100 kN
- Branch: plastics industry
Textile structures are extremely versatile. Geotextiles, for example, are often used in the construction industry. Depending on the wide range of possible applications, a wide variety of tests can be carried out on textile materials.
Testing of connection elements
Universal testing machine Inspekt table blue 5 kN
This universal testing machine Inspekt table 5 kN is equipped with a screw clamping tool, pliers or scissors clamping tool as well as a T-slot plate and further extensive accessories for clamping in order to test interface products.
Determination of the shear strength of brake linings
Universal testing machine Inspekt table 250 kN
- Branch: automotive industry
With this universal testing machine Inspekt table 250 kN brake linings can be tested for shear strength. For this purpose, this testing machine has been equipped with a shearing device, a hydraulic unit and an industrial safety door...
Testing of metals and alloys in research
Universal testing machine Inspekt 250 kN
- Branch: education and research
This universal testing machine Inspekt 250 kN is used in basic university research in the field of production technology. For this purpose, the universal testing machine is equipped with a hydraulic clamping device which enables optimum clamping of these short tensile specimens...
Pipe testing
Apex pressure testing machines
- Branch: plastics industry
Determination of the ring stiffness on pipes
When testing the ring stiffness, differently sized pipe sections are tested depending on the underlying standard and the application the pipes are designed for.
In addition to ring stiffness, ring flexibility, minimum compressive strength and compression strength can also be determined.
Determination of the mechanical properties of solar panels
Universal testing machine inspekt solo 2.5 kN
- Branch: Solar industry
This universal testing machine inspekt solo 2.5 kN allows together with a special testing device to test in production the mechanical properties of solar modules, e.g. thin film solar modules...
Scale SR 721
Scale SR 721
- Magnet technology
- Resolution: 0,5 µm, 1 µm, 2 µm, 5 µm and 10 µm
- Extremely small building
- Simple assembly
Testing of flat tensile samples for the automotive industry
Universal testing machine inspekt 250 kN
- Branch: Automotive industry
With this universal testing machine inspekt 250kN flat tensile samples of aluminium, stainless steel and a variety of deep-drawn sheets can be tested, that are used in the automotive manufacturing...
Testing of chains
Universal testing machine inspekt 600kN + 300kN with lateral test chamber
- Branch: Metal and steel industry
The universal testing machine inspekt 600kN with lateral test chamber serves to test the strength of chains. The main test chamber is provided for the tensile tests on chains...
Determination of mechanical properties on components for the automotive and aviation industry
Universal testing machine inspekt table 20kN
- Branch: Automotive industry, aviation and aerospace industry
This testing machine can be used for tensile, compression and peel tests. In comparison to the standard design, the test room is enlarged, which enables the testing of slightly bigger components as well...
Digital scale SR 801
Yardstick with long measuring length for medium-sized up to big machine tools
- Magnet technology
- Excellent resistivity with workshop conditions (IP54)
- Resistant to oil, dirt, vibrations and percussions
- Accuracy: ± (2,5+2,5L/1000) µm (L = measuring length in mm)
- Resolution: 0,5µm
- Measuring length up to 3000mm
Component testing on steel and aluminium for the automotive industry
Universal testing machine inspekt 250kN
- Branch: Automotive industry
The application area of the universal testing machine inspekt 250kN includes metal tensile tests on round aluminium specimen complying with DIN EN ISO 6892 as well as special component tests...
Determination of mechanical properties on aluminium
Universal testing machine inspekt table 50kN
- Branch: Metal and steel industry
Especially standard tensile tests according to DIN EN ISO 6892-1 shall be performed with the testing machine. Tensile testing for metallic materials at room temperature is defined with this standard...
Metal tensile tests on standardised test specimen
Universal testing machine inspekt 250kN
- Branch: Metal and steel industry
This universal testing machine inspekt 250kN can be employed as material testing machine for pressure and tensile tests on standardised samples, in particular on metallic materials. The testing machine features...
Metal tensile tests on sheet samples and tension/pesssure tests on components for car seats
Universal testing machine Inspekt table 100kN
- Branch: Automotive industry
The testing machine inspekt 100kN features a wider test space in order to test also larger scale components. Furthermore, it is equipped with a work safety door of a new design...
Static-dynamic testing of dental implants
Micro testing device inspekt micro LC 100N
- Branch: Medical industry
The micro testing device Inspekt LC 100N can record material fatigue caused by mechanical stress and ambient conditions. The permanent load test is simulated with maximum load application of 100N as well as 50Hz for alternating loads...
Determination of mechanical properties on CFRP samples
Universal testing machine Inspekt 250kN with temperature chamber and video extensometer
- Branch: Automotive industry, aviation and aerospace industry, plastics industry
Carbon fibre reinforced plastics (CFRP), commonly referred to as carbon, are manufactured by embedding carbon fibres as reinforcement into a plastic matrix. This structure ensures high strength and rigidity accompanied by low weight; the material is therefore used, for example, in aeronautics, vehicle construction or for sports equipment...
Reliable material inspection at high temperatures
Universal testing machine inspekt 100kN with a second testing room and a furnace applicable to either test room
- Branch: aviation and aerospace
Manufacturers of metal components in the aviation and aerospace sector that are often relevant to safety set great store in individually configurable material testing that is not susceptible to malfunction. Especially testing at elevated temperatures is of great importance for the quality assurance of the respective final product...
Testing of implant materials and laboratory instruments
Universal testing machine Inspekt table blue 20kN with squeezing device
- Industry: Medical technology
Innovative biomaterials, such as bone cements, bone implants, as well as substitute materials make an important contribution to improving the quality of life of affected patients. Before these products can be used in the context of a medical treatment, they have to pass strict quality controls...
Tensile tests on the components of vehicle seats
Universal testing machine inspekt 100kN, extended by 550mm, with an external load cell
- Branch: automotive engineering
To reduce the risk of injury in automobile accidents, especially safety relevant components of vehicle seats are tested using the inspekt 100kN special testing machine in terms of their material quality and stability...
Testing Equipment for the determination of adhesion forces
Universal testing machine inspekt mini 3kN
- Branch: automotive engineering
A modern automobile is made up of up to 10,000 individual components, including numerous small and micro components. The Inspekt mini 3kN universal testing machine enables tensile and pressure tests on especially sensitive and sometimes heavily stressed small components like side windows at cars with an inspection fixture for detention force determination of splicing tapes...
Tensile, compression and bending tests on GRP pipe systems
Universal testing machine inspekt 100kN with a lateral test room 50kN
- Branch: plastics industry
GRP pipes are often part of a critical network in civil engineering, for energy suppliers or in other industrial plants. Often, not only they do transport relatively harmless substances and environmentally friendly liquids, but also chemicals, contaminated cooling or heating water, crude oil and similar. To prevent leaks – and thus contamination of the soil and ground water – plastic pipes must meet high material requirements...
Compression and bending testing on styrofoam samples with automatic feeding system
Universal testing machine inspekt table 5kN
- Branch: plastics industry
Styrofoam is especially light and requires an extremely precise testing procedure that can manage large quantities: as part of continuous production, for instance...
Tensile, compression and bending tests on ceramic components
Universal testing machine inspekt table 50kN with a special device for ceramic specimens
- Branch: automotive industry
Since the invention of the spark plug in 1901, ceramic components have gained a secure place in vehicle manufacturing. They are built into a wide variety of components and make an active contribution towards vehicle safety, environmental impact and vehicle comfort. Typical areas of use include, for example, catalytic converters, sensors and lighting technology, particle filters, and much more...
Stress tests with pneumatic indentation
Universal testing machine inspekt mini 3kN with electro-pneumatic specimen marking and ejection unit
- Branch: aviation industry
The Inspekt mini 3 kN universal testing machine conducts stress tests on so-called "firing pins" and is equipped with electro-pneumatic sample marking and pneumatic sample ejection for practical fixation...
Tensile testing of metals and plastics at various temperatures
Universal testing machine 100kN with lateral test room 50kN and temperature chamber
- Branch: metal and plastics industry
The universal testing machine inspekt 100kN with lateral test room 50kN was constructed for the tensile testing of metals and plastics at high and low temperatures...
High temperature metal tensile testing at temperatures up to 900°C using fourtube furnaces
Universal testing machine inspekt 250kN, extended
- Branch: metal and steel industry
Due to long waiting periods for preheating, warm tensile tests are often very time consuming – and thus expensive. The Inspekt 205 kN universal testing machine offers remedies in two ways: reliable test results and shorter test duration...
Toughness testing (KIC) on steels in the low temperature range
Universal testing machine inspekt 400kN
- Branch: steel industry
The universal testing machine inspekt 400kN was developed for material testing in the low temperature range...
Fracturing force of the safety belt, safety belt tightener and safety belt buckle combination
Universal testing machine inspekt 100kN, extended version
- Branche: automotive industry
The inspekt 100kN universal testing machine determines the fracturing force of the safety belt, safety belt tightener and safety belt buckle combination with a nominal load of up to 100kN...
Metal tensile testing in accordance to DIN EN ISO 6892-2
Universal testing machine inspekt 250kN for tensile testing at elevated temperatures
- Branch: metal industry, research and education
In metal tensile tests carried out in accordance with DIN EN ISO 6892-2, the warm stretching limit of a material is determined. Hegewald & Peschke MPT GmbH has equipped the Inspekt 250kN universal testing machine with an extended testing chamber as well as a hinged 3-zone furnace (up to 900°C) for this...
Kontakt:
Hegewald & Peschke
Meß- und Prüftechnik GmbH
Am Gründchen 1
01683 Nossen
Telefon: +49 35242 445-0
Fax: +49 35242 445-111
E-Mail: info@hegewald-peschke.de
Internet: www.hegewald-peschke.de
Austausch von Branchenwissen:
Sichere Prüfresultate:
