• Industry: Metal and steel industry

In the metal tensile test, a clamped specimen is loaded with increasing tensile force F and deformed by an extension ΔL until it finally breaks. Important characteristic values such as the tensile strength, the yield or elongation limit and the elongation at break are determined, which are crucial for the quality assurance of materials and components.

• Branch: Metal and steel industry

The metal tensile test according to ISO 6892-1 or ASTM E8 is an integral part of quality assurance, especially for further processed materials and materials or components. 

With the universal testing machine inspekt duo 10 kN, bending tests as well as compression tests and tensile tests according to DIN EN 14509 can be performed.

• Industry: Metal industry

Measuring the tube length of seamless and welded tubes made of steel and stainless steel is an important step in the quality assurance of these products. Length measuring devices from Hegewald & Peschke are used by various manufacturers of tubes.

• Branch: Metal and Steel industry

The growing demand for efficient lightweight construction in various fields of application demands the use of modern materials with ever increasing numbers of load cycles. Research and development, and especially testing technology, present a number of new challenges.

• Branch: Metal and Steel Industry

The testing system includes a universal testing machine inspekt 600 kN with a lateral testing area and a 3-point bending bench 250 kN as well as a hydraulic clamping tool 600 kN and a fully automatic long distance extension measuring device MFL 300-B. 

• Branch: Metal and steel branch

Components may already show cracks or similar defects during the manufacturing process. Using static tests on deeply cracked specimens to determine fracture toughness, manufacturers and users can prevent material failure through controlled crack growth, monitoring and - if necessary - maintenance/repair.

• Industry sector: Metal Industry

The testing machine is equipped with a hydraulic clamping tool, a rear protective wall and a MFX200 long-stroke extensometer. 

• Branch: Building Industry, Metal and Steel Industry

This universal testing machine inspekt with a maximum test load of 400 kN can be used for bending and tensile tests on reinforcing steel. 

• Branch: Metal and steel industry

The universal testing machine inspekt 600kN with lateral test room serves to test the strength of chains. The main test chamber is provided for the tensile tests on chains.

• Branch: Automotive industry, aviation and aerospace industry

The inspekt table 20 kN universal testing machine enables tensile, compression, flexure and peel tests to be performed on various materials and components. The extended test area compared to the standard version offers sufficient space for larger components, making the machine particularly suitable for applications in the automotive and aerospace industries.

• Branch: Metal and steel industry

This universal testing machine inspekt 250kN can be employed as material testing machine for pressure and tensile tests on standardised samples, in particular on metallic materials. The testing machine features...

• Branch: metal and plastics industry 

The universal testing machine inspekt 100kN with lateral test room 50kN was constructed for the tensile testing of metals and plastics at high and low temperatures...

• Branch: metal and steel industry 

Hot tensile tests are often very time-consuming and therefore cost-intensive due to long preheating times. The inspekt 250 kN universal testing machine offers a dual solution: precise test results and a considerable reduction in test duration.  

• Industries: metal industry, research and education, aerospace, energy generation 

The elevated temperature tensile test according to ISO 6892-2 is used to determine mechanical properties such as yield strength, tensile strength, and elongation at break of metallic materials at high temperatures. Hegewald & Peschke offers a customized solution for these tests with the Inspekt 250kN universal testing machine with an extended testing chamber as well as a hinged 3-zone furnace (up to 900°C), specifically designed for high-temperature tensile testing.