• second hand

Scope of delivery: 

Testing machine with measuring and control electronics

Options necessary for operation: 

Adapter set, load cell, grips, LabMaster user software, PC and, if necessary, protective devices

Price and delivery time on request

• second hand

The testing machine is modernized with current control and measurement electronics based on EDC.

Scope of delivery: 

Testing machine with measuring and control electronics, incl. one 10 kN load cell and table

Options necessary for operation: 

Adapter set, grips, hand control for manual setup operation, LabMaster user software, PC and, if necessary, protective devices

Price and delivery time on request

• as new (year of manufacture 2021)

Technical data:

• Measuring length (L): 2350 mm
• Measuring accuracy: approx. ± (0.06mm + 0.02mm x L)
• load capacity: max. 10 kg workpiece weight
• width: 2500 mm
• weight: approx. 30 kg

consisting of:

• base carrier made of light metal with T-slot support and precision roller guide
• movable measuring carriage (for mounting stops, probes, optics, etc.)
• Magnescale® SL130 magnetic incremental measuring system
• factory calibration with protocol
• M3 display unit with table base (article number: 33-011-604)
• Fixed stop 5 (article number: 33-011-805)
• Mobile stop 5 (article number: 33-011-905)
• 4 x workpiece support 5, L=16 mm (article number: 33-011-705)

Price and delivery time on request

• second hand

The testing machine is modernized with a hydraulic power unit 380 bar with current control and measuring electronics based on EDC.

Scope of delivery: 

Testing machine with measurement and control electronics

Options necessary for operation: 

Load cell, adapter set, grips, hand control for manual setup operation, LabMaster user software, PC and, if necessary, protective devices

Price and delivery time on request

• second hand

The testing machine is modernized with current control and measurement electronics based on EDC.

Scope of delivery: 

Testing machine with measurement and control electronics

Options necessary for operation: 

Load cell, adapter set, grips, hand control for manual setup operation, LabMaster user software, PC and, if necessary, protective devices

Price and delivery time on request

• second-hand, good condition

The testing machine is modernized with current control and measuring electronics based on EDC.

Mechanical construction:

• backlash-free ball screw (centrally located above test area), drive via AC motor, capacity Fmax = 50kN (tension/compression)
• 1 working chamber (up to nominal load), maximum working chamber width (free passage) 2000 mm, maximum working chamber depth approx. 1300 mm, 3 sides fully closed
• test stroke without test tools: 500 mm
• Work table height (above floor): approx. 760 mm plus fixtures (test tools, fixtures)

Dimensions and weights:

• Machine: WxDxH approx. 2475 mm x 1800 mm x 2400 mm, 1,300 kg
• Controller: WxDxH approx. 290 mm x 290 mm x 650 mm / 30kg

Standard functions:

• force- displacement- strain controlled, overload protection, automatic force calibration, control panel for manual operation
• Specimen break detector, return function, manual fine positioning of the crosshead.

Data processing: USB 2.0 interface or LAN

• data transmission rate to PC:50Hz (standard), optionally higher data acquisition frequency via special software add-on module and data acquisition cards
• internal data processing rate 2 ms

Connection conditions: 115/230 VAC, 0,7 kVA, 50/60 Hz, 5- 40°C, 20- 80 % humidity

Scope of delivery: Testing machine with measurement and control electronics, hand control for manual setup operation, protective cover with electrical interlock, specimen collection container.

Options required for operation: Load cell, adapter set, test tools, LabMaster user software, PC

Price and delivery time on request

• used (year of construction: 1970)
• good condition

Price and delivery on demand

• used (year of construction: 1956), but completely retrofitted
• repainted
• new indentor
• electrical retrofit
• modernized mechanics
• NEW: LED lighting
• factory servicing when required

Price and delivery on demand

• self clamping system with wedge action
• 250 kN
• incl. 4 clamping jaws compact (item number: 250.360.0.3.0)
• profile saw tooth lamella
• specimen thickness 0-60mm

suitable for the mounting on universal testing machines with tool loader LK135-12xM12

Price and delivery on request